Jewelry Tools
Browse Subcategories
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair. Stainless steel, style H, length 3-1/2 inches (90mm).
Forms ingots or bullion of various sizes. Cast iron. Depth: 30 mm, Length: 120 mm, Width: 45 mm, Capacity: 124 g.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair.
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs. Dimensions listed are for the flask that each sleeve will fit. Sleeve must be removed prior to burnout. Warning: DO NOT USE if you are NRL latex sensitive.
The opaque shellac sticks are used to set jewels and stones or to hold work temporarily. Heat to apply. Sticks are 7″ long.
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
Plain, hardened steel mandrel may be used for shaping, straightening and enlarging rings. Also for gauging and holding rings while stone setting.
Also known as square handled needle files, these precision files are available in most of the needle file shapes.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape.
Use steel on white metals such as: white gold, silver, and platinum. Crimped wire is .005″ thick and produces a soft matte like finish.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
For tools with 3/32″ shanks. Steel; for right side of motor.
For standard dental taper polishing motors.
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
Slim design for better visibility. Pushing down on body releases striking mechanism, which can be adjusted for light or heavy strokes. Removable centering point can be interchanged with cup-shaped riveting point. Pocket clip included.
Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing.
The protective heat-holding cover makes this efficient for melting with a torch. Handy pouring openings. Made of fused silica with clay bond, for melting temperatures up to 2500°F (1371°C). Best choice for gold, silver, bronze, etc.