Jewelry Tools
Browse Subcategories
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125°F.), burns out clean. Overall length 6″.
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
Grobet USA Swiss Pattern Precision precision files. The standard for quality and performance! Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by […]
Indispensable gauge helps to size gemstones quickly and accurately. Sizes range from 1 pt. to 2.1 ct., plus baguettes. Aluminum disks fold together when not in use.
This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/16″ to 1″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/32″ to 1/4″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
1-5/16″ high x 1-3/16″ wide.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
7/8″ OD.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple, Some flexibility 240° F (116° C).
3-1/2″ x 3-1/2″ x 1-3/8″, 1/2 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Green wax cannot be flexed. Approximate melting temperature is 240° F (116° C).
3-3/4″ x 1-1/8″ x 1-1/8″, 1/6 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple Some flexibility. Approximate melting temperature is 240° F (116° C).
Various shapes and colors for trial use. Also handy for having around in case an odd piece is needed.
6″ long arch-shaped block of carving wax is designed to simplify the construction of bracelets. From one blank style you can create round, oval or square bracelets in a variety of sizes. Simply cut two slices of the desired thickness to form the bracelet, then trim using the Matt Shaper.
Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).
Enlarge the finger size of your wax models quickly and accurately. Hardwood mandrel is specially machined to incorporate a cutting steel blade that extends from the handle to the tip on the tapered section. Slide this tool through the hole of wax ring or ring tube and gently rotate clockwise. As the blade turns it scrapes inner wall, enlarging the ring to the size that is marked along the mandrel, leaving a smooth and even finish on the ring.
3-1/8″ L x 1-7/16″ W and assorted thickness from 1/8″ to 1″. Box of 12.
Matt Carving Wax Slices, Purple, Assortment of 9 pieces
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x 3-1/8″, 1/2 pound bar.
Chemkote muslin buffs with shellac centers are more aggressive. The treated muslin helps remove surface scratches from work. Excellent for use with tripoli and abrasive compounds.
Use the best buff available for final polishing of platinum. Stiff, chemically treated muslin with good cutting action and high compound retention. Provides high lustre. Reduce polishing time. Durable and long lasting. Sold individually.
Diameter: 6″
Ply: 5
Stitching: 4 Rows
Leather Center
Use the best buff available for final polishing of platinum. Stiff, chemically treated muslin with good cutting action and high compound retention. Provides high lustre. Reduce polishing time. Durable and long lasting. Sold individually.
Diameter: 5″
Ply: 40
Stitching: 3 Rows
Leather Center
Durable, treated muslin. Ideal for use with aggressive compounds to remove scratches from gold. Excellent compound retention. Provides robust polishing for a high lustre on all hard metals. Sold individually.
Diameter: 5″
Ply: 50
Stitching: 4 Rows
Leather Center
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 13/16″
3/32″ Shank
Sold by the Dozen.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 11/16″
3/32″ Shank
Sold by the Dozen
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Inverted
Diameter: 11/15″
3/32″ Shank
Sold individually.
Use to obtain matte finishes on metal, wood and plastic. Nylon fibers impregnated with abrasive granules. Use with mandrel 43.162.
Diameter: 1″
Thickness: 1/4″
Arbor Hole: 1/8″
Medium
Sold individually.
Use to obtain matte finishes on metal, wood and plastic. Nylon fibers impregnated with abrasive granules. Use with mandrel 43.162.
Diameter: 1″
Thickness: 1/4″
Arbor Hole: 1/8″
Fine
Sold individually.