Jewelry Tools
Browse Subcategories
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Grinding Wheel, 2″ x 1/4″, Fine Grit, Silicon Carbide, 1/4″ Arbor Hole. The rating on these wheels is not to exceed 8500 RPM.
Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).
You save (%)
Hard solid felt, with tapered edges for polishing joints and crevices.
Diameter: 1/2″
Use with mandrels sold separately.
Sold by the Box of 24.
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 9/64″ (3.7 mm)
Cut 00
Handles are knurled.
Overall Length 5-1/2″ (140 mm)
Width 9/64″ (3.5 mm)
Cut 4
Nicely polished and beveled on one end for smaller mountings this industry standard is tempered to the proper hardness tough but not brittle.
Made of clay bonded fused silica for melting temperatures up to 2800°F (1538°C).Excellent for melting gold and silver. Diameter: 4″, Depth: 1-3/8″
Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.
6″ long arch-shaped block of carving wax is designed to simplify the construction of bracelets. From one blank style you can create round, oval or square bracelets in a variety of sizes. Simply cut two slices of the desired thickness to form the bracelet, then trim using the Matt Shaper.
Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).
Hard solid felt, with tapered edges for polishing joints and crevices.
Diameter: 5/8″
Use with mandrels sold separately.
Sold by the Box of 24.
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 2
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64 (2.1 mm)
Cut 0
Diamond points are instruments with diamond particles electroplated onto stainless steel. Excellent for stone carving, cleanup work, glass, ceramics and metals.
Especially handy for bead stringers on the go! Cute to look at but extremely functional. Working head is constructed from the same size blanks as larger pliers.
Removes rust and dirt from metal surfaces. Fine glass bristles are mounted in a plastic case. Bristles can be screw-fed as they wear down. Bristles measure 1/2″ x 3/16″.
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
Oval-shaped steel burnishers for smoothing of bezels around stones and smoothing other parts of soft metals. Highly polished blades are firmly set in wood handles.
This special shaped cylinder buff is well suited for polishing interior and broad surfaces.
Diameter: 2″
Length: 1-3/4″
Sold individually.
BRIGHTBOY Abrasives. For deburring, finishing and polishing. The resilient rubber binder cushions the aluminum oxide abrasive and bridges the gap between grinding and polishing. Recommended for use on stainless steel, chrome and precious metals. Approximately 70 grit.
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
Economical quality hammers designed for silversmiths and ideal for craftsmen. Complete with hardwood handles.
You save (%)
Wheel Diameter: 1″
Wheel Thickness: 1/4″
Hole Size: 1/16″
Ideal for use with rubberized abrasives. Sold by dozen.
1% wool, ideal for precision deburring, polishing and finishing. Can be charged with compounds. Specifically designed for use with flex-shafts and similar tools.
Shape: Knife Edge Wheel
Diameter: 11/16″
3/32″ Shank
Sold by the Dozen