Jewelry Tools
Browse Subcategories
With reversible steel collets in each end. Hexagonal heads prevent rolling. Hollow handle and heads made of brass. Capacity is 0 to .125″ (0 to 3.2 mm). Overall length 4-1/8″ .
With hollow handle and grooved corrugated jaws that open and close by turning handle. Design allows you to hold long wire pieces not accessible with regular hand vise. Width of jaws 1/2″, overall length 4-3/4″.
Shaped for holding Burno style crucibles. Length 10-1/2 inches (267 mm).
Position the ring shank and setting to solder solitaires quickly and easily. Curved jaw has groove to hold shank securely, while flat jaw is serrated to prevent movement.
Metal: Non-Magnetic Stainless Steel
Length: 5-1/2″
Slide-Lock
Metal: Stainless Steel
Length 6-1/2″
Point: Medium Sharp
Metal: Stainless Steel
Length: 5-1/2:
Point: Fine
Finish: Bright
Metal: Stainless Steel
Length: 5-1/2:
Point: Medium
Finish: Bright
Extra long with straight smooth points. Overall length 7 inches (178 mm).
Metal: Stainless Steel
Extra long with rounded smooth, curved points. Overall length 7 inches (178 mm).
Metal: Stainless Steel
6-1/4 inches long with fine points.
Metal: Nickel Plated Carbon
Finish: Black
Metal: Stainless Steel with Black Finish
Length: 5-1/2″
Point: Fine
Overall length 6-1/4 inches.
Metal: Stainless Steel
Length: 5-1/2″
Point: Cup Shaped Coated
Metal: Stainless Steel
Length: 4-1/2″
Point: Sharp
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
Accommodates standard stamps with approximately 5/16″ square bodies. Eliminates the need to hold ring and stamp in one hand. Simply position ring over mar-proof plastic anvil (55.201) and tap stamp with mallet. Easy and accurate time-saver. Eliminates slipping of ring. Also ideal for flat stamping. The sleeve can be reversed or the stamp body can be touched up with a file if stamp is not 5/16″ square. Stamps not included.
Ingenious dispenser contains solder with flux. The proper amount of solder and flux can be placed at the exact point required, eliminating waste and improving the appearance of the joint. Solder contains no cadmium. 1/2 oz.
Available in 1/4 oz. sheets.
Grade: Easy
Melting Point: 1240°F (671°C)
A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.
Used for soldering virtually all metals, except aluminum, magnesium or titanium. Not recommended for use in electrical or electronic applications.
Cross-locking, 6 1/2″ tweezers closes when released. Mounted on heavy-duty horseshoe base.
Handy tool for pushing prongs or crown points around stones. Steel tool mounted in wood handle.
Knurled chuck holds the point in either the scribing position or reversed within the steel body so that it can be carried safely in a pocket. Hexagonal head prevents rolling on bench and knurled body provides secure gripping. Nickel-plated. Economy version.
Handle Diameter: 1/4″
Can be used on hard jewels, metals, etc. Hexagonal aluminum handle prevents rolling on bench. Length 5-1/4″.
Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.
Frame for 5 inch pinned blades
Designed with “S” bends to the frame, it accommodates unobstructed viewing directly over the area to be cut. The frame is equipped with an ergonomic pistol grip handle fabricated with reinforced fiber-filled plastic. Knurled thumbscrew provides easy-to-use blade tension control. Manufactured at our factory in Vallorbe, Switzerland.
Jewelers Sawframe with End Screw, 2-1/2″ Depth
Revolutionary lightweight design, perfectly balanced saw frames. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. Blade tightening screw must be opened wide enough to allow saw blades to be inserted all the way.
Grobet Swiss-style. Revolutionary designed, perfectly balanced sawframe. Ergonomic handle reduces fatigue and provides greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use.
Grobet Swiss-style. Revolutionary design in three lightweight, perfectly balanced sawframes. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. 23/4″ (70 mm) deep. * Blade tightening screw must be opened wide enough to allow sawblades to be inserted all the way.
Manufactured at Grobet’s factory, Scies Miniatures, in Vallorbe, Switzerland.
Thickness: .011″
Width: .023″
Teeth per Inch: 51
Manufactured at Grobet’s factory, Scies Miniatures, in Vallorbe, Switzerland.
Thickness: .024″
Width: .053″
Teeth per Inch: 24
Designed for wax cutting. Every other tooth is eliminated to provide smooth cutting and non-loading action. One dozen size #1 blades to a package. Sold by dozen.
Thickness: .019″
Width: .040″
Teeth per Inch: 30
Sold by the dozen.
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
Recommended for fine finishing and burnishing precious metals, brass, bronze and similar materials with plastic, ceramic or metal media. Supplied with Raytech MFA metal finishing kits. Use approximately 1 tsp. per pint of water.
Full length-split leather with superior wrap-around style and elastic comfort back. Maximum protection for all jewelry-making operations.
Standard, fast-cutting tripoli, used when rouge will be used for final finish.
For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.
Linde A for precious gems, gold, silver and other metals.
1 oz. Bottle
For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.
Red rouge for platinum, gold and silver.
Eliminates the mess and does away with broken bars. Peel-back cardboard tube exposes only the amount needed.
For producing a rich, dark luster on white gold, platinum, or silver. 5 oz.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.
Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.