Jewelry Tools

Creates superior shape while wire wrapping

This 39-1/4″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
EE, GG, MMG.

With brass collar. Used with rubber points. Sold by dozen.

Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 5″.

Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Cross lock version,mad of Nickel plated steel.

Grobet Swiss-style. Revolutionary design in three lightweight, perfectly balanced sawframes. Ergonomic handles reduce fatigue and provide greater dexterity. Patented blade-lock design eases blade insertion, maintains perfect alignment and eliminates wobble which reduces blade loss during use. Set screws can be used on either the left or right side of the frame according to your preference. 23/4″ (70 mm) deep. * Blade tightening screw must be opened wide enough to allow sawblades to be inserted all the way.

Handles are knurled.

Overall Length: 5-1/2″ (140 mm)

Width: 3/16″ (5.0 mm)

Thickness: 5/64″ (2.1 mm)

Cut 4

Hi-Shine

Size: 7/8″ x 1/8″

Hole: 1/16″

Edge: Square

Sold by the box of 20

Handles are knurled.

Overall Length 5-1/2″ (140 mm)

Width 9/64″ (3.5 mm)

Cut 0

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.3 mm)

Thickness: 5/64″ (2.1 mm)

Cut 4

Our gauges are nickel-plated for years of use at the retail level. Graduated in U.S. Standard half-sizes. Half-Round size 1 to 15

A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.

Length 6″ (150 mm)

Width 13/64″ (5.0 mm)

Cut 2

Reimers Heating Element Gasket.  #02281

White, hard pre-polisher for precious metals.

Regular width, flat, economy model with matte finish, sizes 1-15.

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.

100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 5/64″ (2.0 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.

Face Diameter: 9/16″ (14 mm)

Head Length: 2″ (51 mm)

Head Weight: 2 1/2 oz. (71 g)

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.

Metal: Non-Magnetic Stainless Steel

Length: 4-1/2″

Point: Sharp

Mallet is supplied with one flat brass head and one fiber head. Head 2″ (51 mm)

This 39″ long inner shaft comes installed and should be used to replace broken or worn shafts on various motors.

A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.

Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.

Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. Pack of 5 – 2 Gram Tubes.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs.

Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.

Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).