Jewelry Tools
Browse Subcategories
Has two steel chucks with spare chuck held in end of hollow brass handle. Will not roll off your bench. Capacity 0 to .079″ (0 to 2.0 mm).
Our steel square forming mandrel is great for use when a square corner is needed to bend wire or sheet. This mandrel has clipped square corners for more of a rounded square corner. Overall length is 12″ with a taper from 6mm – 18mm. Mandrels have a threaded end to accommodate the included square threaded […]
Our steel square forming mandrel is great for use when a square corner is needed to bend wire or sheet. Overall length is 12″ with a taper from 6mm – 18mm. Mandrels have a threaded end to accommodate the included square threaded rod allowing use in a vise or hole in bench keeping both hands […]
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
These tweezers have thin, spade-shaped tips which make it easy to pick up delicate objects, such as stamps. Overall length 4-1/2 inches (114 mm).
A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.
Used for soldering virtually all metals, except aluminum, magnesium or titanium. Not recommended for use in electrical or electronic applications.
The original perfect non-scratch holder for steam and ultrasonic cleaning. Steamostats feature stainless steel box-joint construction PVC covered non-scratching tips.
This unique brush is designed for fast and easy cleaning of burs.
This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.
6″ lengths in assorted sizes from 20 to 70 by drill gauge. Packed in plastic tubes.
Stepped aluminum mandrel securely mounts on a steel base and easily rotates 360″. The smooth round steps allow you to precisely size rings when wax working or using metal clay. Mandrel is clearly marked with sizes 4-13 and can be removed from the stand for handheld use. Total length: 13″.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
1/2″ Diameter 3/32″ Shank. Sold by the dozen.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
9/16″ Diameter 3/32″ Shank. Sold by the dozen.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
1/2″ Trim, 3/16″ Diameter 3/32″ Shank. Sold by the dozen.
Stiff Bristle, 1/4″ Trim, 1/4″ Diameter 3/32″ Shank. Excellent quality precision brush. Clean and polish in hard-to-reach places. Sold by the dozen.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
1/4″ Trim, 3/16″ Diameter 3/32″ Shank. Sold by the dozen.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
3/8″ Trim, 3/16″ Diameter 3/32″ Shank. Sold by the dozen.
Excellent quality precision brush. Clean and polish in hard-to-reach places.
5/8″ Trim, 3/16″ Diameter 3/32″ Shank. Sold by the dozen.
30% additional fill gives more body for the right feel and longer brush life. A metal hub with a thinner profile is assembled on specially designed production equipment. The result is a perfect brush. Bristles won’t split and washers won’t spin. For use on polishing motors with mandrels 47.258 or 47.259.
1″ Diameter 1/8″ Arbor Hole. Sold by the dozen.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places. 1 dozen in a pack.
30% additional fill gives more body for the right feel and longer brush life. A metal hub with a thinner profile is assembled on specially designed production equipment. The result is a perfect brush. Bristles won’t split and washers won’t spin. For use on polishing motors with mandrels 47.258 or 47.259.
3/4″ Diameter 1/8″ Arbor Hole. Sold by the dozen.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
3/4″ Diameter 1/8″ Shank. Sold by the dozen.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
Double section for heavy duty use.
3/4″ Diameter 1/8″ Shank. Sold by the dozen.
Excellent quality precision brush. Clean and polish in hard-to-reach places. Sold by the dozen.
30% additional fill gives more body for the right feel and longer brush life. A metal hub with a thinner profile is assembled on specially designed production equipment. The result is a perfect brush. Bristles won’t split and washers won’t spin. For use on polishing motors with mandrels 47.258 or 47.259.
Sold by the dozen.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
9/16″ Diameter 3/32″ Shank. Sold by the dozen.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.
Double section for heavy duty use. Sold by the dozen.
Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places. Double section for heavy duty use. 1 dozen in a pack.
For use with wheels up to 3″ diameter and 1/4″ thick, with 1/4″ arbor holes.
For standard dental taper polishing motors.
For right side of motor.
For setting or tightening the prongs on stone set rings. Jaws have been shaped so that they fit over the prongs on a setting. Overall length is 5″. Economical value.
Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing.
Use brass on yellow metals such as copper and brass. Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Use brass on yellow metals such as copper and brass. Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Use brass on yellow metals such as copper and brass. Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Use brass on yellow metals such as copper and brass. Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Oval-shaped steel burnishers for smoothing of bezels around stones and smoothing other parts of soft metals. Highly polished blades are firmly set in wood handles.
Oval-shaped steel burnishers for smoothing of bezels around stones and smoothing other parts of soft metals. Highly polished blades are firmly set in wood handles.
Oval-shaped steel burnishers for smoothing of bezels around stones and smoothing other parts of soft metals. Highly polished blades are firmly set in wood handles.
Our blue-handled French shears can cut up to 20 gauge sheet stock. With narrow points for easy maneuvering, this series features the best blades made.
Use steel on white metals such as: white gold, silver, and platinum. Straight wire is .0035″ thick and produced a pronounces finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Use steel on white metals such as: white gold, silver, and platinum. Straight wire is .0035″ thick and produced a pronounces finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.
Use steel on white metals such as: white gold, silver, and platinum. Straight wire is .0035″ thick and produced a pronounces finish. Used for cleaning, deburring, and surface finishing.
Made of strong white cardboard with red strings, no imprinting available. Sold by box of 1000.
Made of strong white cardboard with purple strings, no imprinting available. Sold by box of 1000.
Made of strong white cardboard with red strings, no imprinting available. Sold by box of 1000.
Quality adhesive cement can be used on unbreakable crystal or foil back jobs. Pressure-sensitive adhesive holds firmly and peels away easily for quick application. Pin point applicator ensures accurate dispensing.
Made of 100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer with minimal fraying and better compound retention. Achieve a smooth, uniform finish with superior coloring quality every time.
Diameter: 7/8″
Ply: 16
Stitching: 1 Row
Shellac Center
Sold by the Dozen
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.
100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.