Jewelry Tools
Browse Subcategories
Handles are knurled.
Overall length 6-1/4″ (160 mm)
Width 15/64″ (5.8 mm)
Thickness 1/16″ (1.7 mm)
Cut 6
Avoid the high cost of prescription safety glasses. Save money over prescription safety glasses. Safety glasses and corrective lenses combined into one, for close-up work. These glasses compare to drug store “readers” while conforming to ANSI Z87.1 2003 specifications for high impact protection. Check with your Eye Doctor for the best diopter model for you.
For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. 32oz.
Grinding Wheel, 3″ x 1/2″, Medium Grit, Silicon Carbide, 1/4″ Arbor Hole. The rating on these wheels is not to exceed 8500 RPM.
High-quality diamond cut loupe provides clarity and eliminates distortion. Black color. Sold individually. All loupes come in a leather case. 10X power.
Economical, it dilutes 40 to 1 for light or 20 to 1 for heavy cleaning. Use to remove dirt, grease, buffing compounds, rouge, tripoli and oxides, cleaning instruments, burs, metal parts, gold and fine jewelry.
Excellent tweezers for handling all miniature and micro-miniature parts. Shanks are tapered with beveled edges; points have been honed and are very sharp.
The original EURO TOOL nylon jaw pliers are a must for straightening wire especially colored wire.
Serrated jaws for pulling wire. Made of forged steel with an ergonomic design.
on wire. One handle is formed to aid in pulling. Made of forged steel.
Length: 10″
Extra Duty box-joint pliers feature double-leaf springs and red vinyl grips. Made in Germany of the finest European steel.
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. One end is coarser than the other. Double cut on both sides.
Length: 7″ (175 mm)
Width: 1/2″ ( 12.6 mm)
Thickness: 9/64″ (3.6 mm)
With fiber grips for heat resistance. Overall length 6-1/2 inches
Jaws taper to 1/32″ at tips and can be used to make bends and for gripping and manipulating wires. Overall length 6″, length of jaws 1-1/2″. Smooth jaws.
Curved tips taper to 1/16″ for setting small stones. Box joint for alignment with built-in spring. Overall length is 4-1/2″.
Used on platinum, gold, silver, and stainless steel watch bands and cases
This 6-1/4 jumbo version is made of thicker high grade tool steel for heavier cutting jobs. Excellent for small sprues it will cut up to 14 gauge -2.5mm- soft wire.
Slim line acrylic job envelope holder is 3 1/2″ x 11″. Comes with three dividers to keep your job orders separate.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
Bergeon plastic bench mat 250mm x 350mm x 0.5mm. Self adhesive sticks to any work bench. Mat is antistatic. Works well in watchmaking and jewelry applications.
This 14pc Tap and Die set has screwplate with taps for threading wire or re-threading stripped threads on screws. Sizes 0.7 – 2.0mm.
Use these versatile wheels for watch bands or for light de-burring and polishing of non-ferrous metals. They replace hand pads and reduce the need for a finishing operation. Great for satin finishing of steel, and ideal for surface contaminant removal.
Plastic handle, 10-1/2″ long, holds strips of emery paper or cloth 11″ x 1″. Strips can easily be replaced. Supplied with 2 strips, grit 120 and 240.
The protective heat-holding cover makes this efficient for melting with a torch. Handy pouring openings. Made of fused silica with clay bond, for melting temperatures up to 2500°F (1371°C). Best choice for gold, silver, bronze, etc.
Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing.
Slim design for better visibility. Pushing down on body releases striking mechanism, which can be adjusted for light or heavy strokes. Removable centering point can be interchanged with cup-shaped riveting point. Pocket clip included.
Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.
Cut 4
Width: 1/8″ (3.0 mm)
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
Made of hand-cut steel to stamp impressions on metal surfaces. The sizes noted are for the height of the impression.
Bent
For tools with 3/32″ shanks. Steel; for right side of motor.
For standard dental taper polishing motors.
Grobet USA Swiss Pattern Precision files. The standard for quality and performance! Hand files are parallel in width and tapered in thickness. Double cut top and bottom. One edge single cut. One edge is safe.
Use steel on white metals such as: white gold, silver, and platinum. Crimped wire is .005″ thick and produces a soft matte like finish.
Also known as square handled needle files, these precision files are available in most of the needle file shapes.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape.
Plain, hardened steel mandrel may be used for shaping, straightening and enlarging rings. Also for gauging and holding rings while stone setting.
General use tweezers with sturdier points slightly wider and thicker tips than pattern No. 1. Indented and have flat edges for gripping object with tip or side. The plain finished points have a fine tip.
A triplet lens system for correcting spherical and chromatic aberrations. Eliminates color degradation and puts every part of the wide field of view in sharp focus.
The opaque shellac sticks are used to set jewels and stones or to hold work temporarily. Heat to apply. Sticks are 7″ long.
No more messy masking tape! These latex rubber sleeves are placed over the flask to contain the investment while pouring and also form a collar so that no spilling occurs. Dimensions listed are for the flask that each sleeve will fit. Sleeve must be removed prior to burnout. Warning: DO NOT USE if you are NRL latex sensitive.
One end clamps from the outside for polishing and stone setting, while the other end holds from the inside for total circumference polishing and buffing.
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
Suitable for electronics, laboratories, light industry, optical and camera assembly and repair.
Forms ingots or bullion of various sizes. Cast iron. Depth: 30 mm, Length: 120 mm, Width: 45 mm, Capacity: 124 g.
Boley style tweezers are excellent general utility tweezers.