Jewelry Tools
Browse Subcategories
Small strainers with bendable metal handles which may be used for holding normally or can be bent as shown to hang onto the side of your favorite ultrasonic unit leaving hands free.
You save (%)
Ultrasonic racks are excellent to suspend rings and bracelets into solution without damage to the metal or soft stones.
You save (%)
Metal: Stainless Steel
Length 6-1/2″
Point: Serrated tip
You save (%)
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″ Ply: 60 Stitching: 3 Rows Leather Center
You save (%)
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
You save (%)
Unmounted solid felt is used directly on a tapered spindle. Available in hard and extra hard.
Diameter: 5/8″
Length: 4″
Sold individually.
You save (%)
Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.
You save (%)
Extra board for 135.0361, V-Slot Board and Clamp. Measures 7-1/2″ L x 2-1/2″ W.
You save (%)
Package of 5 replacement hooks for ultrasonic ring rack.
You save (%)
Use with rouge for final polishing. Made of soft cotton flannel, stitched with shellac centers.
Diameter: 4″
Ply: 3
Stitching: 3 rows
Sold individually
You save (%)
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 10, 0.50mm.
You save (%)
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life. The lengths vary from approximately 1-3/4″ to over 7″, with diameters gauged slightly below largest portion of the cutting edges.
You save (%)
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 5″
Ply: 45
Stitching: 3 Rows
Shellac Center
Uncombed
You save (%)
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/8″
Hard
Sold by the Box of 24.
You save (%)
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
You save (%)
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
You save (%)
Tightly Compressed wool felt creates a medium wheel for all-purpose polishing and buffing. Pin Hole Center.
You save (%)
The #120 grit is suited for small burrs and line removal.
You save (%)
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 6″
Ply: 30
Stitching: 4 Rows
Shellac Center
Uncombed
You save (%)
Superior quality, soft textured, loose buffs, with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 60
Stitching: 1 Row
Leather Center
You save (%)
Use on platinum, chrome and stainless steel.
Approximate weight, 4 oz.
You save (%)
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 28
Unstitched
Plastic Center
You save (%)
Perfect for polishing objects with rounded surfaces. Solid felt with pinhole center. Used with tapered mandrels.
Diameter: 3/4″
Length: 1-1/2″
Sold individually.
You save (%)
For polishing objects that have concave surfaces. Made of solid felt with pin hole center. Used with tapered mandrels.
Diameter: 3/4″
Length: 1-1/2″
Sold individually.
You save (%)
Chungking bristles mounted into hardwood hubs with 1/4″ arbor holes for use on the tapered spindles of polishing motors.Genuine Chungking bristle insures longer life & superior polishing action piece after piece. Wood hubs are seasoned hardwood and oil-treated to prevent splitting and guarantee long-lasting service. Bristle tufts are “staple-set” into hubs to remain securely fastened until completely worn down.
4 rows of converging bristle.
Hub Diameter – 1-7/8″
Trim Length -13/16″
Overall Diameter – 3-1/2″
You save (%)
For all-purpose use. 7-1/2″ long with wood handle.
You save (%)
Sprue Base, 4″, Tree Style. Perfect for high production operations.
You save (%)
Swiss made Pike Brand Jewelers Sawblades. 5/0 size.
Thickness: .008″
Width: .016″
Teeth per Inch: 66
You save (%)
Sprue Base, 2 1/2″, Tree Style. Perfect for high production operations.
You save (%)
Superior quality knife edge buffs are perfect for use with rouge for buffing crevices.
Diameter: 5″
Ply: 12
Stitching: 7 Rows
Razor Edge
You save (%)
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/8″
Soft
Sold by the Box of 24.
You save (%)
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
You save (%)
High-quality unmounted brushes are used for polishing with flex-shaft machines.
You save (%)
Surgically sharp blades fit into comfortable plastic handle. Widely used for cutting rubber molds.
You save (%)
Four rows of nylon bristles 1-3/4″ long, 1/2″ wide. Angled lucite handle. Overall length 6-3/4″.
You save (%)
For cleaning inside confined areas. Three rows of extra stiff bristles are 1-7/8″ long, 3/8″ high. Overall length 6″.
You save (%)
Replacement diamond reamer tips, 45 Degree Angle.
You save (%)
Superior quality, soft textured, loose buffs, with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 50
Stitching: 1 Row
Leather Center
You save (%)
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 36
Unstitched
Plastic Center
You save (%)
This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.
You save (%)
Golden-Glo Rouge. Adds high luster and color to gold. Small boxed 4.0oz
You save (%)
30% additional fill gives more body for the right feel and longer brush life. A metal hub with a thinner profile is assembled on specially designed production equipment. The result is a perfect brush. Bristles won’t split and washers won’t spin. For use on polishing motors with mandrels 47.258 or 47.259.
Sold by the dozen.
You save (%)
Chungking bristles mounted into hardwood hubs with 1/4″ arbor holes for use on the tapered spindles of polishing motors.Genuine Chungking bristle insures longer life & superior polishing action piece after piece. Wood hubs are seasoned hardwood and oil-treated to prevent splitting and guarantee long-lasting service. Bristle tufts are “staple-set” into hubs to remain securely fastened until completely worn down.
3 rows of converging bristle.
Hub Diameter – 1-5/8″
Trim Length – 11/16″
Overall Diameter – 3″
You save (%)
Mandrel for cartridge rolls. Rubber head. Turn screw to expand head and tighten band.
You save (%)
You save (%)
Superior quality, soft textured buffs, with combed edges, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 60
Stitching: 3 Rows
Shellac Center
Combed Edge
You save (%)
Ruby Mounted Point, .117 Diameter, .259″ Head Length, 3/32″ Shank, sold individually.
You save (%)
Swiss made Pike Brand Jewelers Sawblades. 4/0 size.
Thickness: .009″
Width: .017″
Teeth per Inch: 64
You save (%)
Plastic scoop for handling dry investment. Sold with investment scale, item #21.773.
You save (%)
For iron, steel and hard metals for coarse buffing and removing scratches, rust, corrosion, burs, etc. Not for gold, silver or plated articles. 5 oz.
You save (%)
Superior quality, soft textured buffs, with combed edges, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 50
Stitching: 4 Rows
Shellac Center
Combed Edge
You save (%)