Jewelry Tools
Browse Subcategories
White, hard pre-polisher for precious metals.
White, hard pre-polisher for precious metals.
Grey, medium pre-polisher for precious metals.
Grey, medium pre-polisher for precious metals.
Grey, medium pre-polisher for precious metals.
Mandrel for use with Pacific Abrasives Inside Ring Cylinders.
3/32″ shank.
Mandrel for use with all Pacific Abrasives Mini Points.
3/32″ shank.
Green, extra-fine polisher for precious metals, specifically softer metals such as platinum.
Green, extra-fine polisher for precious metals, specifically softer metals such as platinum.
Green, extra-fine polisher for precious metals, specifically softer metals such as platinum.
Size is 1″ height x 1/2″ diameter.
Designed specifically for polishing and finishing inside rings.
This wheel is specially designed to minimize heat buildup on your work surface. It can be used on metal alloys and many plastics/composites.
Pacific Abrasives Silicone Carbide 7/8″, Coarse, Square Edge Wheels.
Sold in a pack of 20 pc.
3mm points for hard-to-reach areas.
Available in 3 grits – hard, medium, and high-shine.
Use with mandrel #117.0894
Pink, gold flash high-shine polishers for precious metals.
Leaves a brilliant high-gloss finish after the initial polishing process.
1000 grit.
Pink, gold flash high-shine polishers for precious metals.
Leaves a brilliant high-gloss finish after the initial polishing process.
1000 grit.
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth. Grits from 4/0 (finest) to 3 (coarsest).
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth. Grits from 4/0 (finest) to 3 (coarsest).
Coat with adhesive and roll in abrasive to form a polishing stick. Has 1/4″ arbor hole for tapered spindle mounting. Made of birchwood. May also be used to hold delicate items while polishing.
Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4″ wide sanding belt.
Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4″ wide sanding belt.
Replacement belts available, Three stick grits available: 120(red), 320(green) & 600(black)
Santaper Belts, Sold by pack of 10. Available in 120, 240, 320, 400 & 600 grits.
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
The rating on these wheels is not to exceed 8500 RPM.
Diameter: 3″ Thickness: 1/2″ Hole: 1/2″
Use with Sangers emery shells. Drilled to fit on a tapered spindle. Also handy as a holder for polishing rings, chains, etc. 4-1/4″ with 1/8″ arbor hole.
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
Slot holds emery paper so it can be wound around mandrel to desired thickness.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
GRS Third-Hand Attachments make precise soldering easy by holding parts in the exact position needed.
Works with the BenchMate System for soldering. Platform measures 4″ and easily attaches right to your Benchmate system.
The #120 grit is suited for small burrs and line removal.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.