Jewelry Tools
Browse Subcategories
The “Original Ring Adjuster” Ring Snuggies provide a snug fit for a ring on any finger.
Kit includes inner shaft, pair of motor brushes, grease, and operation manual.
Made of the highest quality optical glass, this Optivisor 2.75X (#7) lens plate has a 6 inch focal length.
32-5/8″ long, standard material outer sheath comes equipped on ALL Flexades: S.B0-516, S.B0-14, S.B0-12, S.B0-38
Our customers say that this is the world’s best 6pc wax needle file set. The teeth are finer and there are more teeth per inch than others.
The finest steel, milled to perfection with a diamond coating makes this 5pc set the best for precision filing jobs. Longevity is assured, as the diamond particles are electroplated onto the surface of the metal.
This 33-1/2″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
F, JJ, JB.
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. Both open to 1/4″. Overall length is 4-1/2″.
Midget-sized hollow handle metal pin vise with screw chuck. Capacity 0 to .020″ (0 to .51 mm), overall length 1-7/8″.
The H.18 is for use with only 2.35mm (3/32″) shank burs.
H.15D has the same specs as the H.15, except includes a duplex spring for added flexibility.
The H.15 Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work.
H.10 is a slender handpiece with rotating lever action that releases and closes the collet for quick and easy changes.
H.10D has the same specs as the H.10, except includes a duplex spring for added flexibility.
The H.8 is a slim collet type handpiece with pre-lubricated ball bearings that require no additional lubrication.
The H.30® general purpose handpiece has prelubricated ball bearings that do NOT require any additional lubrication. Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories.
This 1/8″ thick rubber cushion provides an added layer of comfort to H.30 and H.30SJ Handpieces. Grip slides on easily but holds firmly.
Foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot.
This foot operated speed control comes in a heavy cast iron metal housing. The extra weight provides added stability and control.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
Includes Pin Vices: 0 to .040″, .025″ to .062″, .050″ to .125″, and .115″ to .188″.
Indented. Overall length 4-3/8 inches (111 mm). Sharp points.
Metal: Stainless Steel
Point: Medium Sharp
With pointed shank. Overall length 4-3/4 inches (121 mm). Sharp points.
Small holder fits in pocket. Wire jaws contract into body and plunger in end opens the jaws. Overall length 2 inches (51 mm).
For gripping and holding small objects. Plunger in handle opens wire jaws that contract back into handle. Overall length 4-3/4 inches
Chromium-plated steel tweezers with serrated points and locking device. Overall length 5-1/2 inches (140 mm) Fine points.
Extremely high quality European-made tweezers with medium serrated tips that grip and hold even the most delicate objects securely without damage.
Metal: Nickel Plated Carbon
Length: 5-1/8″
Point: Sharp
Our tungsten soldering pick can withstand higher temperatures than titanium picks. Will not contaminate platinum. Length: 6″.
High-quality tweezers to make handling diamonds easy
Less expensive version of pattern No. 3; points are not as precision finished. Overall length 4-3/4 inches (121 mm)
Metal: Stainless Steel
Point: Sharp
Similar to pattern No. 4, except have very narrow needle-like points. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Very Sharp
Shorter version of pattern No. 3. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Sharp
Closing pressure is easily adjusted with these slidelock tweezers. Rounded serrated points.
Phenomenal tools for filing and shaping wax but also exceptional bead or pearl reaming tools.
Our newest and best ring clamp offers the user greater reliability than other ring clamps.
Saves time and makes soldering ring shanks together easy fast and simple.
Small hollow jaws for holding and closing jump rings, small loops, etc. Made of stainless steel with cushioned grips and now with narrower jaws. Length 5-1/2″ (140mm).
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.
Swiss Pattern Screwdriver Set in Plastic Box- 7 pieces
Only 4 -100mm- long and a narrow .079 -2.0mm- thick this highly tempered opener allows the jeweler easy access to small prongs.
Made of tempered steel this is our economical model. A great value for the price. 4-3/4.