Jewelry Tools
Browse Subcategories
Pen-shaped, spring-loaded mechanism. Measures 43/4″ long with 1/16″ diameter fiberglass brush. Great for tight places and electronic applications. Made in Germany.
The original EURO TOOL nylon jaw pliers are a must for straightening wire especially colored wire.
The Micro Crimper is also an adaptation of the Original Crimper to be used with 1mm size crimps.
Now you can crimp any crimp bead of “medium” size (2mm-3mm) and various shapes quick and easy!
High-quality drills have straight shanks and are accurately ground then carefully tempered. Size: 0.0350 inches (0.889mm). Packed ten per box.
These tweezers have thin, spade-shaped tips which make it easy to pick up delicate objects, such as stamps. Overall length 4-1/2 inches (114 mm).
Excellent for handling diamonds, pearls and beads. Nickel-plated with chrome finish
Excellent for handling diamonds, pearls and beads. Non-reflective black finish
Nature’s Touch Citric Acid Pickle is a mild pickling solution used for silver, gold, brass and copper.
The retrieving forceps have blunt rounded serrated points. Drop-forged for extra durability, and ideal for use when steam cleaning or ultrasonic cleaning. The guide pin is not included on this model.
Closing pressure is easily adjusted with these slidelock tweezers. Blunt points.
With fiber grips for heat resistance. Overall length 6-1/2 inches
The “Original Ring Adjuster” Ring Snuggies provide a snug fit for a ring on any finger.
Kit includes inner shaft, pair of motor brushes, grease, and operation manual.
Made of the highest quality optical glass, this Optivisor 2.75X (#7) lens plate has a 6 inch focal length.
32-5/8″ long, standard material outer sheath comes equipped on ALL Flexades: S.B0-516, S.B0-14, S.B0-12, S.B0-38
This 33-1/2″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
F, JJ, JB.
A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.
Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. Both open to 1/4″. Overall length is 4-1/2″.
The H.18 is for use with only 2.35mm (3/32″) shank burs.
H.15D has the same specs as the H.15, except includes a duplex spring for added flexibility.
The H.15 Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work.
H.10 is a slender handpiece with rotating lever action that releases and closes the collet for quick and easy changes.
H.10D has the same specs as the H.10, except includes a duplex spring for added flexibility.
The H.30® general purpose handpiece has prelubricated ball bearings that do NOT require any additional lubrication. Comes with HPCK-0 Chuck Key in molded plastic handle for changing accessories.
This 1/8″ thick rubber cushion provides an added layer of comfort to H.30 and H.30SJ Handpieces. Grip slides on easily but holds firmly.
Foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
Tool steel collets grip firmly when screw chuck is tightened. Chromium-plated handles are hollow to permit holding of long wires.
Indented. Overall length 4-3/8 inches (111 mm). Sharp points.
Metal: Stainless Steel
Point: Medium Sharp
With pointed shank. Overall length 4-3/4 inches (121 mm). Sharp points.
Small holder fits in pocket. Wire jaws contract into body and plunger in end opens the jaws. Overall length 2 inches (51 mm).
For gripping and holding small objects. Plunger in handle opens wire jaws that contract back into handle. Overall length 4-3/4 inches
Chromium-plated steel tweezers with serrated points and locking device. Overall length 5-1/2 inches (140 mm) Fine points.
Extremely high quality European-made tweezers with medium serrated tips that grip and hold even the most delicate objects securely without damage.
Metal: Nickel Plated Carbon
Length: 5-1/8″
Point: Sharp
Our tungsten soldering pick can withstand higher temperatures than titanium picks. Will not contaminate platinum. Length: 6″.
Less expensive version of pattern No. 3; points are not as precision finished. Overall length 4-3/4 inches (121 mm)
Metal: Stainless Steel
Point: Sharp
Similar to pattern No. 4, except have very narrow needle-like points. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Very Sharp
Closing pressure is easily adjusted with these slidelock tweezers. Rounded serrated points.
Phenomenal tools for filing and shaping wax but also exceptional bead or pearl reaming tools.
Our newest and best ring clamp offers the user greater reliability than other ring clamps.
Saves time and makes soldering ring shanks together easy fast and simple.