Jewelry Tools
Browse Subcategories
Overall Length: 7-3/4″ (200 mm)
Width: 1/4″ (6.5 mm)
Thickness: 5/64″ (2.0 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (1.8 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (1.8 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length 4″ (100 mm)
Width 9/64″ (3.6 mm)
Thickness 3/64″ (1.1 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 7-1/4″ (200 mm)
Width: 1/4″ (6.4 mm)
Thickness: 1/16″ (1.6 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 13/64″ (5.1 mm)
Thickness: 3/64″ (1.3 mm)
Cut 4
You save (%)
Round knurled handles aid gripping. Used by mold makers, goldsmiths, gunsmiths, and musical instrument manufacturers for precise finishing on small surfaces.
Widely used in making and repairing extrusion dies.
Overall Length: 6-1/4″ (160 mm)
Width: 13/64″ (5.0 mm)
Thickness: 3/32″ (2.3 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64 (2.1 mm)
Cut 0
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 00
You save (%)
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 0
You save (%)
Handles are knurled.
Overall Length: 4″ (100 mm)
Width: 5/32″ (3.7 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
You save (%)
Warding files are parallel in thickness and tapered in width. Useful for removal of burs. Double cut top and bottom – Both edges are single cut.
Cut 2
Length: 4″ (100 mm)
Width: 31/64″ (12.5 mm)
Thickness: 3/64″ (1.0 mm)
You save (%)
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. One end is coarser than the other. Double cut on both sides.
Length: 7″ (175 mm)
Width: 1/2″ ( 12.6 mm)
Thickness: 9/64″ (3.6 mm)
You save (%)
Three-Square files are gradually tapered, cut and workable to the point. Double cut on all three sides.
Length 8″ (200 mm)
Width 33/64″ (13.0 mm)
Cut 2
You save (%)
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
You save (%)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
You save (%)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
You save (%)
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
You save (%)
Metal: Titanium
Length: 4-1/2″
Point: Sharp
You save (%)
Serrated jaws for pulling wire. Made of forged steel with an ergonomic design.
on wire. One handle is formed to aid in pulling. Made of forged steel.
Length: 10″
You save (%)
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.
You save (%)
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.
You save (%)
Computes weight of diamond without removing stone from mounting. Width and depth are measured with caliper and compared with measurements in table. For round and fancy shapes.
You save (%)
The holes in the gauge are used to measure stones, while the extensions are used to measure mountings. One side shows millimeters, the other side shows the corresponding carat measurements.
You save (%)
High quality Dazor 3-Bulb bench lamp. Adjustable arm makes positioning easy anywhere on the bench. Clamps or bolts to your bench with ease.
You save (%)
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
You save (%)
Sold by the box of 100.
You save (%)
Hi-Shine
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
You save (%)
Hi-Shine
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
You save (%)
Size: 7/8″
Hole: 1/16″
Edge: Knife
Sold by the box of 20
You save (%)
Size: 5/8″ x 1/8″
Hole: 1/16″
Edge: Square
Sold by the box of 20
You save (%)
Size: 7/8″ x 1/8″
Hole: 1/16″
Edge Square
Sold by the box of 20
You save (%)
Ideal for polishing concave surfaces on small objects. Made of solid felt with hard density. Use with tapered mandrel. Diameter: 1/4″ Length: 3/8″ Sold by the Box of 25.
You save (%)
All-purpose laboratory and industrial tong for holding, manipulating and pouring, as well as for picking up hot objects. With serrated tips. Stainless steel with long neck.
Length: 9″ (229 mm)
You save (%)