Jewelry Tools

Self-locking jaws are ideal for soldering operations, or for holding parts. Blunt and serrated jaws.

Metal: Stainless Steel

Length: 6-1/2″

The holes in the gauge are used to measure stones, while the extensions are used to measure mountings. One side shows millimeters, the other side shows the corresponding carat measurements.

Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.

Length 6″ (150 mm), width 1/2″ (12.7 mm)

Computes weight of diamond without removing stone from mounting. Width and depth are measured with caliper and compared with measurements in table. For round and fancy shapes.

Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.

Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.

Overall length 6-1/4 inches.

Metal: Stainless Steel

Length: 5-1/2″

Point: Cup Shaped Coated

One jaw is half-round and the other is round. Overall length is 5-1/2″.

Serrated jaws for pulling wire. Made of forged steel with an ergonomic design.

on wire. One handle is formed to aid in pulling. Made of forged steel.

Length: 10″

Metal: Titanium

Length: 4-1/2″

Point: Sharp

Half-round on two sides, with one side having a larger radius than the other. Tapered in width and thickness. Cut and usable to the point. Used primarily for filing interior curved surfaces. The double radius makes possible the filing at the junction of two curved surfaces or a straight and a curved surface. Double cut on both sides.

Length: 6″ (150 mm)

Width: 5/8″ (16.0 mm)

Thickness: 11/64″ (4.5 mm)

Cut 2

Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.

Length: 6″ (150 mm)

Width: 1/2″ (13.0 mm)

Thickness: 3/32″ (2.5 mm)

Cut 2

A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.

Length 6″ (150 mm)

Width 13/64″ (5.0 mm)

Cut 0

A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.

Length 6″ (150 mm)

Width 13/64″ (5.0 mm)

Cut 2

Gradually tapered, cut and workable to the point. Double cut on all four sides.

Length 6″ (150 mm)

Width 23/64″ (9.0 mm)

Cut 2

Three-Square files are gradually tapered, cut and workable to the point. Double cut on all three sides.

Length 8″ (200 mm)

Width 33/64″ (13.0 mm)

Cut 2

Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. Double cut on both sides of coarser end. One side single cut and one side double cut on other end.

Length: 8″ (200 mm)

17/32″ (13.5 mm)

Thickness: 5/32″ (4.0 mm)

Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. One end is coarser than the other. Double cut on both sides.

Length: 7″ (175 mm)

Width: 1/2″ ( 12.6 mm)

Thickness: 9/64″ (3.6 mm)

Warding files are parallel in thickness and tapered in width. Useful for removal of burs. Double cut top and bottom – Both edges are single cut.

Cut 2

Length: 4″ (100 mm)

Width: 31/64″ (12.5 mm)

Thickness: 3/64″ (1.0 mm)

Handles are knurled.

Overall Length: 4″ (100 mm)

Width: 5/32″ (3.7 mm)

Thickness: 1/16″ (1.4 mm)

Cut 2

Handles are knurled.

Overall Length: 5-1/2″ (140 mm)

Width: 3/16″ (5.0 mm)

Thickness: 5/64″ (2.1 mm)

Cut 0

Handles are knurled.

Overall Length: 5-1/2″ (140 mm)

Width: 3/16″ (5.0 mm)

Thickness: 5/64 (2.1 mm)

Cut 2

Handles are knurled.

Overall Length: 5-1/2″ (140 mm)

Width: 3/16″ (5.0 mm)

Thickness: 5/64″ (2.1 mm)

Cut 4

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.3 mm)

Thickness: 5/64″ (2.1 mm)

Cut 00

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.3 mm)

Thickness: 5/64 (2.1 mm)

Cut 0

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.3 mm)

Thickness: 5/64″ (2.1 mm)

Cut 2

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.3 mm)

Thickness: 5/64″ (2.1 mm)

Cut 4

Handles are knurled.

Overall Length: 7-3/4″ (200 mm)

Width: 15/64″ (5.9 mm)

Thickness: 3/32″ (2.2 mm)

Cut 0

Handles are knurled.

Overall Length: 7-3/4″ (200 mm)

Width: 15/64″ (5.9 mm)

Thickness: 3/32″ (2.2 mm)

Cut 4

Round knurled handles aid gripping. Used by mold makers, goldsmiths, gunsmiths, and musical instrument manufacturers for precise finishing on small surfaces.

Widely used in making and repairing extrusion dies.

Overall Length: 6-1/4″ (160 mm)

Width: 13/64″ (5.0 mm)

Thickness: 3/32″ (2.3 mm)

Cut 2

Handles are knurled.

Overall Length: 5-1/2″ (140 mm)

Width: 13/64″ (5.1 mm)

Thickness: 3/64″ (1.3 mm)

Cut 4

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.5 mm)

Thickness: 1/16″ (1.4 mm)

Cut 0

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.5 mm)

Thickness: 1/16″ (1.4 mm)

Cut 2

Handles are knurled.

Overall Length: 6-1/4″ (160 mm)

Width: 7/32″ (5.5 mm)

Thickness: 1/16″ (1.4 mm)

Cut 4

Handles are knurled.

Overall Length: 7-1/4″ (200 mm)

Width: 1/4″ (6.4 mm)

Thickness: 1/16″ (1.6 mm)

Cut 2

Handles are knurled.

Overall Length 4″ (100 mm)

Width 9/64″ (3.6 mm)

Thickness 3/64″ (1.1 mm)

Cut 2