Jewelry Tools

Jewelry Shield’s specially patented formula lasts much longer than any other product or remedy available. One application lasts three months. 1/2 oz. bottle.

Pink, gold flash high-shine polishers for precious metals.

Leaves a brilliant high-gloss finish after the initial polishing process.

1000 grit.

Lightweight nylon black frame with soft PVC nosepiece. Molded-in side protection offers increased coverage for side impart. Adjustable temples lock into place.

Made of clay bonded fused silica for melting temperatures up to 2800°F (1538°C).Excellent for melting gold and silver. Diameter: 4″, Depth: 1-3/8″

Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.

Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.

Pink Hi-Shine

Size: 5/8″ x 1/8″

Hole: 1/16″

Edge: Square

Sold by the box of 20

Suitable for all purpose polishing and buffing. Pin hole centers.

Diameter: 4″

Thickness: 1/2″

Soft

Designed for polishing small and difficult to reach areas. For use with a mandrel.

Diameter: 2″

Ply: 16

Stitching: 4 Rows

Sold by the dozen

Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).

Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).

Yellow abrasive with press-on/flip-off center hole feature. Exclusive grit and backing are designed for jewelry applications and provide exceptionally long life.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. Pack of 5 – 2 Gram Tubes.

Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.

A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.

This 39″ long inner shaft comes installed and should be used to replace broken or worn shafts on various motors.

Mallet is supplied with one flat brass head and one fiber head. Head 2″ (51 mm)

Metal: Non-Magnetic Stainless Steel

Length: 4-1/2″

Point: Sharp

Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.

Face Diameter: 9/16″ (14 mm)

Head Length: 2″ (51 mm)

Head Weight: 2 1/2 oz. (71 g)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)