Jewelry Tools
Browse Subcategories
White, hard pre-polisher for precious metals.
Grey, medium pre-polisher for precious metals.
Mandrel for use with all Pacific Abrasives Mini Points.
3/32″ shank.
Green, extra-fine polisher for precious metals, specifically softer metals such as platinum.
This wheel is specially designed to minimize heat buildup on your work surface. It can be used on metal alloys and many plastics/composites.
Pink, gold flash high-shine polishers for precious metals.
Leaves a brilliant high-gloss finish after the initial polishing process.
1000 grit.
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth. Grits from 4/0 (finest) to 3 (coarsest).
Coat with adhesive and roll in abrasive to form a polishing stick. Has 1/4″ arbor hole for tapered spindle mounting. Made of birchwood. May also be used to hold delicate items while polishing.
Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.
The rating on these wheels is not to exceed 8500 RPM.
Diameter: 3″ Thickness: 1/2″ Hole: 1/2″
The finest made! To smooth and polish the insides of rings. Fits snugly over wood mandrel. Made in both emery paper and longer lasting cloth.
Slot holds emery paper so it can be wound around mandrel to desired thickness.
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
Glue bonded, silicon carbide for fast cutting. Far outlasts lapped bands. All are 1/2″ long. Grit textures: COARSE (60); MEDIUM (80); FINE (120).
The #120 grit is suited for small burrs and line removal.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
For use with light pressure at much less than 25,000 RPM maximum safe speed. 1/16″ holes for use with mandrel Nos. 43.124 or 43.154. Sold by box of 100.
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
7/8″ diameter, fine grit, aluminum oxide, brass center. Mounted on thin backing, provides excellent results in sanding and smoothing operations.
Supports work for flattening and laying out designs. Case-hardened. Ground flat and smooth.
Supports work for flattening and laying out designs. Case-hardened. Ground flat and smooth.
Illuminated 1.75X magnifier provides hands free viewing. Adjustable arm provides light source quickly and efficiently to work area
- Bright LED lights, 72 bulbs
- 5″ diameter lens
- 1 3/4x Magnification
Suitable for workshop or desktop use. Three Fluorescent bulbs provide ample illumination
Extra board for 135.0361, V-Slot Board and Clamp. Measures 7-1/2″ L x 2-1/2″ W.
Fits into slot in your work bench. Use as support when filing, sawing, setting, etc. Dimensions: 6-1/4″ x 2-1/4″
Fits into slot in your work bench. Use as support when filing, sawing, setting, etc. Dimensions 5-1/4″ x 2-1/8″
Lightweight nylon black frame. Clear protective sides. Adjustable temples.
Opens prongs without fracturing stones. The top jaw is a claw that grips the prong and the lower jaw is grooved to hold the prong.
Also known as square handled needle files, these precision files are available in most of the needle file shapes.
Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape.
Versatile magnification glasses for professional jewelers and watchmakers.
Adjustable LED Light, 2-Bulbs. Five interchangeable lenses. Features1.0X, 1.5X, 2.0X, 2.5X and 3.0X magnification
The safety glasses are supplied in a handy carry case with a polishing cloth to clean the Optics and a convenient cord to hold your glasses around your neck. Magnification: 2.5X. Working Distance: 11″ – 15″. Field View: 3.75″