Jewelry Tools
Browse Subcategories
Superior quality, soft textured, loose buffs, with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 50
Stitching: 1 Row
Leather Center
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 50
Stitching: 3 Rows
Leather Center
Replacement diamond reamer tips, 45 Degree Angle.
For cleaning inside confined areas. Three rows of extra stiff bristles are 1-7/8″ long, 3/8″ high. Overall length 6″.
Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4″ wide sanding belt.
Replacement belts available, Three stick grits available: 120(red), 320(green) & 600(black)
Surgically sharp blades fit into comfortable plastic handle. Widely used for cutting rubber molds.
High-quality unmounted brushes are used for polishing with flex-shaft machines.
Special resin-over-resin bonding technique resists heat and holds the abrasive particles to give you amore uniform cut. Highly wear-resistant and waterproof.
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/8″
Soft
Sold by the Box of 24.
Superior quality knife edge buffs are perfect for use with rouge for buffing crevices.
Diameter: 5″
Ply: 12
Stitching: 7 Rows
Razor Edge
Sprue Base, 2 1/2″, Tree Style. Perfect for high production operations.
Swiss made Pike Brand Jewelers Sawblades. 5/0 size.
Thickness: .008″
Width: .016″
Teeth per Inch: 66
Sprue Base, 4″, Tree Style. Perfect for high production operations.
Chungking bristles mounted into hardwood hubs with 1/4″ arbor holes for use on the tapered spindles of polishing motors.Genuine Chungking bristle insures longer life & superior polishing action piece after piece. Wood hubs are seasoned hardwood and oil-treated to prevent splitting and guarantee long-lasting service. Bristle tufts are “staple-set” into hubs to remain securely fastened until completely worn down.
4 rows of converging bristle.
Hub Diameter – 1-7/8″
Trim Length -13/16″
Overall Diameter – 3-1/2″
For polishing objects that have concave surfaces. Made of solid felt with pin hole center. Used with tapered mandrels.
Diameter: 3/4″
Length: 1-1/2″
Sold individually.
Perfect for polishing objects with rounded surfaces. Solid felt with pinhole center. Used with tapered mandrels.
Diameter: 3/4″
Length: 1-1/2″
Sold individually.
Vigor Super Glue sets in 45 to 60 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass. 2 Gram Tube.
Vigor Super Glue sets in 10 to 20 seconds. Perfect for jewelry repair. Exceptional adhesion for metal, most plastic, ceramic and glass.
2 Gram Tube
Superior quality, soft textured, loose buffs, with plastic centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 28
Unstitched
Plastic Center
Use on platinum, chrome and stainless steel.
Approximate weight, 4 oz.
Superior quality, soft textured, loose buffs, with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″
Ply: 60
Stitching: 1 Row
Leather Center
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 6″
Ply: 30
Stitching: 4 Rows
Shellac Center
Uncombed
The #120 grit is suited for small burrs and line removal.
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
Miniature square edge wheels are perfect for polishing and finishing. Used with a mandrel.
Diameter: 1″
Thickness: 1/8″
Hard
Sold by the Box of 24.
Regular muslin is great when used with abrasive compounds such as tripoli to remove scratches. Sold individually.
Diameter: 5″
Ply: 45
Stitching: 3 Rows
Shellac Center
Uncombed
Cutting, cleaning and finishing broaches made of high quality steel and uniformly tempered for long life. The lengths vary from approximately 1-3/4″ to over 7″, with diameters gauged slightly below largest portion of the cutting edges.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 10, 0.50mm.
Use with rouge for final polishing. Made of soft cotton flannel, stitched with shellac centers.
Diameter: 4″
Ply: 3
Stitching: 3 rows
Sold individually
Package of 5 replacement hooks for ultrasonic ring rack.
Extra board for 135.0361, V-Slot Board and Clamp. Measures 7-1/2″ L x 2-1/2″ W.
Swiss made Pike Brand Jewelers Sawblades. 6/0 size.
Thickness: .007″
Width: .014″
Teeth per Inch: 76
Replacement Tips for Hoke-Jewel Torch
Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.
Unmounted solid felt is used directly on a tapered spindle. Available in hard and extra hard.
Diameter: 5/8″
Length: 4″
Sold individually.
Made of tungsten vanadium steel. 3/32″ diameter shanks. 1-3/4″ long. Can be used with flex shaft machines or micromotors. Sold individually.
Superior quality, soft textured buffs, stitched with leather centers, are perfect for use with rouge to produce a high finish.
Diameter: 4″ Ply: 60 Stitching: 3 Rows Leather Center
Fits into slot in your work bench. Use as support when filing, sawing, setting, etc. 7″ x 2-1/2″
Metal: Stainless Steel
Length 6-1/2″
Point: Serrated tip
Hanging 16 hook ultrasonic cleaning racks measures 5 x 2-3/4 x 1-3/4. Racks have heavy PVC coating and double sided arms. Fits 1 and 2 quart lengthwise and 3 6 and 10 quart tanks crosswise.
Ultrasonic racks are excellent to suspend rings and bracelets into solution without damage to the metal or soft stones.
Our 4-3/4 lug gauge gives you the exact measurement you need to determine the distance between watch lugs for spring bars bands or bracelets.
Economical black glass stone used with solutions and test needles to determine karat values.
Measures: 2″ x 1-1/2″ x 3/16″
The best quality American-made beading cord available. Synthetic nylon fibers are stronger as they are made of three strands of long fiber, not just two. Will not stretch or stain and resist fraying and shredding.
Unbreakable stainless steel, nylon-coated wire with three strands. Super tough cord that will not be cut by rough edges.
A necessary bench accessory, bench pins are made of fine hardwoods to fit slots in work benches.
Saves time and makes soldering ring shanks together easy fast and simple.
Excellent for handling diamonds, pearls and beads. Non-reflective black finish
Excellent for handling diamonds, pearls and beads. Nickel-plated with chrome finish
Bead Tips or knot covers give your jewelry a professional finished look.