Jewelry Tools

Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout. Dimensions: 2-3/8″ x 1-7/8″

Mounted buffs on 3/32″ mandrels. Great for texturing small pieces.

Diameter: 1″

Fine

3/32″ Shank

Sold by the dozen

Made of fused silica with clay bond, for melting temperatures up to 2500°F(1371°C). Best choice for gold, silver, bronze, etc. Dimensions do not include 3/8″ pouring spout.

This 33-1/2″ long inner shaft should be used to replace broken or worn shafts on these discontinued motors:
F, JJ, JB.

4 shapes with different sizes on each end. Can be used at room temperature or heated.

Rubber Mixing Bowl, 1 Gallon

Lead Wires-Set Of 2 For 3 Amp

These files are parallel in width and tapered in thickness to make possible perfectly flat filing. Double cut top and bottom – Both edges are safe.

For high-detail and ultra-precision work. Files may be broken off and cemented onto a holder or used with a pin vise. Fine grit.

Overall Length: 7-3/4″ (200 mm)

Width: 1/4″ (6.5 mm)

Thickness: 5/64″ (2.0 mm)

Cut 2

Jewelers Standard Sawframe, 5″ Depth, German Made.

Use brass on yellow metals such as copper and brass. Straight wire is .0035″ thick and produces a pronounced finish and is used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.

Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.

Metal: Stainless Steel, Length: 4-3/4″, Point: Sharp

Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Made of Nickel plated steel. Length: 10″

Excellent quality precision wheel brush mounted on a mandrel. Clean and polish in hard-to-reach places.

Double section for heavy duty use.

3/4″ Diameter 1/8″ Shank. Sold by the dozen.

Medium-duty bench knife features a slim 1-3/4″ blade set firmly in hardwood handle. Overall length 5″.

For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.

Fine, 150 mesh.

Wide width, flat, sizes 1-15.

The rating on these wheels is not to exceed 8500 RPM.
Diameter: 3″ Thickness: 1/2″ Hole: 1/2″

For standard dental taper polishing motors.

Supports work for flattening and laying out designs. Case-hardened. Ground flat and smooth.

100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.

For highlighting or subtle dark background effects. Gives a dark, dull antique finish to class rings, or any other jewelry. Adheres to any metal, dries in minutes.