Jewelry Tools
Browse Subcategories
Overall Length: 7-3/4″ (200 mm)
Width: 1/4″ (6.5 mm)
Thickness: 5/64″ (2.0 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (1.8 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length 6-1/4″ (160 mm)
Width 7/32″ (5.6 mm)
Thickness 5/64″ (1.8 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length 4″ (100 mm)
Width 9/64″ (3.6 mm)
Thickness 3/64″ (1.1 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 7-1/4″ (200 mm)
Width: 1/4″ (6.4 mm)
Thickness: 1/16″ (1.6 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 13/64″ (5.1 mm)
Thickness: 3/64″ (1.3 mm)
Cut 4
You save (%)
Round knurled handles aid gripping. Used by mold makers, goldsmiths, gunsmiths, and musical instrument manufacturers for precise finishing on small surfaces.
Widely used in making and repairing extrusion dies.
Overall Length: 6-1/4″ (160 mm)
Width: 13/64″ (5.0 mm)
Thickness: 3/32″ (2.3 mm)
Cut 2
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64 (2.1 mm)
Cut 0
You save (%)
Handles are knurled.
Overall Length: 6-1/4″ (160 mm)
Width: 7/32″ (5.3 mm)
Thickness: 5/64″ (2.1 mm)
Cut 00
You save (%)
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 4
You save (%)
Handles are knurled.
Overall Length: 5-1/2″ (140 mm)
Width: 3/16″ (5.0 mm)
Thickness: 5/64″ (2.1 mm)
Cut 0
You save (%)
Handles are knurled.
Overall Length: 4″ (100 mm)
Width: 5/32″ (3.7 mm)
Thickness: 1/16″ (1.4 mm)
Cut 2
You save (%)
Warding files are parallel in thickness and tapered in width. Useful for removal of burs. Double cut top and bottom – Both edges are single cut.
Cut 2
Length: 4″ (100 mm)
Width: 31/64″ (12.5 mm)
Thickness: 3/64″ (1.0 mm)
You save (%)
Double-end vulcanite file with open, coarse teeth for filing plastics, waxes and soft materials. One end is coarser than the other. Double cut on both sides.
Length: 7″ (175 mm)
Width: 1/2″ ( 12.6 mm)
Thickness: 9/64″ (3.6 mm)
You save (%)
Three-Square files are gradually tapered, cut and workable to the point. Double cut on all three sides.
Length 8″ (200 mm)
Width 33/64″ (13.0 mm)
Cut 2
You save (%)
Gradually tapered, cut and workable to the point. Double cut on all four sides.
Length 6″ (150 mm)
Width 23/64″ (9.0 mm)
Cut 2
You save (%)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 2
You save (%)
A general purpose file, cut and usable to the point. Gradually tapered. Double cut on all four sides.
Length 6″ (150 mm)
Width 13/64″ (5.0 mm)
Cut 0
You save (%)
Equalling files are parallel in width and thickness. Used primarily for filing slots and corners. Double cut top and bottom. Both edges are single cut.
Length: 6″ (150 mm)
Width: 1/2″ (13.0 mm)
Thickness: 3/32″ (2.5 mm)
Cut 2
You save (%)
Metal: Titanium
Length: 4-1/2″
Point: Sharp
You save (%)
Serrated jaws for pulling wire. Made of forged steel with an ergonomic design.
on wire. One handle is formed to aid in pulling. Made of forged steel.
Length: 10″
You save (%)
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.
You save (%)
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.
You save (%)