Jewelry Tools

White, hard pre-polisher for precious metals.

Regular width, flat, economy model with matte finish, sizes 1-15.

Made of the finest Swiss-milled Vanadium steel for long life and accuracy. All burs are total length of 44.5mm with 3/32″ (2.35mm) shanks for quick-change handpieces.

100% cotton. Patented process removes impurities and makes the cloth finer and nearly lint-free. With ordinary abrasive elements removed, Super buffs last up to 50% longer.

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 5/64″ (2.0 mm)

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.

Face Diameter: 9/16″ (14 mm)

Head Length: 2″ (51 mm)

Head Weight: 2 1/2 oz. (71 g)

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.