Hand Vise with Wood Handle, 6-1/4″ OAL

A lightweight vise mounted in a wood handle. Smooth jaws are 1-1/4″ wide and open to 1″. Overall length is 6-1/4″.

$13.25

Add to cart

Foredom S-93 Shaft, 39″ Long, Standard

This 39″ long inner shaft comes installed and should be used to replace broken or worn shafts on various motors.

$13.25

Add to cart

Brass & Fiber Mallet

Mallet is supplied with one flat brass head and one fiber head. Head 2″ (51 mm)

$13.25

Add to cart

Swiss Pattern Tweezer, Grobet USA Brand, Pattern #3C

Metal: Non-Magnetic Stainless Steel

Length: 4-1/2″

Point: Sharp

$13.25

Add to cart

Crimped Brass Wire Wheel Brush, 1″ Diameter 3/32″ Shank

Use brass on yellow metals such as copper and brass. Crimped wire is .005″ thick and produces a soft matte like finish. Used for cleaning, deburring, and surface finishing. Precision made, excellent quality. Sold by the dozen.

$13.25

Add to cart

Tapered Spindle 1/2 Left

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

$13.25

Add to cart

Tapered Spindle 5/8 Left

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

$13.25

Add to cart

Brass & Fiber Mallets 2 1/2 oz.

Versatile hammer with interchangeable faces to provide any combination desired. Supplied with two different faces and wrench to tighten or remove collars.

Face Diameter: 9/16″ (14 mm)

Head Length: 2″ (51 mm)

Head Weight: 2 1/2 oz. (71 g)

$13.25

Add to cart

Grobet USA Escapement File, Barrett, Cut 4

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

$13.40

Add to cart

Grobet USA Escapement File, Barrett, Cut 6

Also known as square handled needle files, these precision files are available in most of the needle file shapes. Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 6

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

$13.40

Add to cart

Grobet USA Escapement File, Pillar, Cut 4

Overall length is 5-1/2″ (140 mm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 4

Width: 9/64″ (3.5 mm)

Thickness: 3/64″ (1.0 mm)

$13.40

Add to cart

Grobet USA Escapement File, Half-Round, Cut 2

Overall length is 5-1/2″ (14 cm), length of cut is 1-9/16″ to 2-9/16″ (40 to 65 mm) depending upon shape. Widely used by jewelers, watch makers, die makers, and fine mechanics.

Cut 2

Width: 9/64″ (3.7 mm)

Thickness: 3/64″ (1.3 mm)

$13.40

Add to cart