Pliers & Cutters
Browse Subcategories
These versatile, stainless steel pliers can be used as a clamp, heat sink or third hand while soldering. Handles have a two-position locking device and are insulated with vinyl plastisol. Overall length 5 3/4″. Curved.
These versatile, stainless steel pliers can be used as a clamp, heat sink or third hand while soldering. Handles have a two-position locking device and are insulated with vinyl plastisol. Overall length 6″. Straight.
Punch 2mm holes in leather or plastic bands with this handy plier. Great for sizing bands. Length 5-1/2 -145mm-.
This ultra-light plier gives the user precise surgeon-like control with a slim size of 3/16 x 1/8 at hinge pin.
Large ring cutting pliers are a new addition and easier to use than traditional ring cutting pliers. Made entirely of stainless steel the handles are gently curved.
Made in Germany. Overall length is 4 3/4″. Curved tip chain nose.
Use these sturdy shears for cutting soft wire up to 16 ga. thick and sheet up to 20 ga. thick. Sharp blades (57–59 HRC) leave a very clean edge.
Excellent performing pliers with extremely precise jaw alignment. Joint movement is highly stable and smooth which means extra precision even at the extreme tip of the jaws. Double-leaf springs with high-impact cushion grips. Overall length: 120mm (4.72″) Jaws: Flat Nose, Smooth Jaw Length: 20mm (0.79″) Tip Width: 3.2mm (0.13″)
Advanced diagonal flush cutting nippers, unsurpassed in cutting capacity.
Advanced diagonal micro-bevel cutting nippers, unsurpassed in cutting capacity.
Advanced diagonal cutting nippers, unsurpassed in cutting capacity.
- Overall length: 120mm (4.72″)
- Jaws: Round Nose, Very Fine
- Jaw length: 20mm (0.79″)
- Tip width: 0.7mm
The Micro Crimper is also an adaptation of the Original Crimper to be used with 1mm size crimps.
1mm, 1.5mm, 2mm, 2.5mm, 3mm, and 4mm – Use with wire 22 gauge or thinner. Beadsmith
Absolutely the best box-joint pliers available at this price or even several dollars more.
Absolutely the best box-joint pliers available at this price or even several dollars more.
Scissor handle shears are great for cutting heavier metals and copper plate up to B & S gauge #20. This narrow blade model has large loop handles that are extra comfortable.
Commonly used for the link style bands with a T-bar style pin holding the links together
The original EURO TOOL nylon jaw pliers are a must for straightening wire especially colored wire.
Provides a square vise-like grip. Heavy, flat nose, Serrated, Slot “V”, Overall length 5-1/2″.
Provides a square vise-like grip. Chain nose, Smooth, Slot – Cross, Overall length 5″.
Provides a square vise-like grip. Light, flat nose, Smooth, Slot “V”, Overall length 5″.
Parallel action provides even pressure while holding firm. The durable nylon will prevent marring scratches or damage to the piece being held. Spring action and knurled grip add comfort and ease of use. Replacement jaws available: PLR-864.05. Length 5-1/2 inches. Jaw opening measures 3/8 inch.
Made of clear Lucite, our plier rack keeps tools off the bench and easy to find. Rack features holes for needle files, burs and other tools. Gives you more bench space and speeds up work because you spend less time looking for the right tool! Size: 10-1/2″ x 3-3/4″ x 4″
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″ End cutter
Practical wooden plier rack with seven compartments, space below to store various small tools and a drawer to safely hold those small parts essential to every bench. Dovetailed joints and varnished finish. Dimensions: 3-3/4″ x 6-1/2″ x 7-1/2″
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.
One jaw is half-round and the other is round. Overall length is 5-1/2″.
Ergonomic compound flush cutter that offers the finest in compound leverage construction at an affordable price.
3 pliers with end cutting, round and serrated flat jaws. Swiss Made.
5 Pliers with cutting(2x), half round, round and flat jaws. Comes with wooden block for storage. 130mm length.
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 4-1/2″.
Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5-1/4″.
Provide greater accessibility. Overall length is 5-1/4″, smooth jaws 1-5/8″. Chain nose.
Provide greater accessibility. Overall length is 5 1/4″, smooth jaws 1 5/8″. Flat nose.
Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 4 1/2″. Made in Germany.
Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 5 1/4″. Made in Germany.
Round nose type. Provides greater accessibility. Overall length is 5 1/4″, smooth jaws 1 5/8″.
German-made pliers feature a thinner claw to get in behind prongs.
Opens prongs without fracturing stones. The top jaw is a claw that grips the prong and the lower jaw is grooved to hold the prong.
Regular edges for cutting soft to medium hard wires. Jaws are set at right angles for getting close to work. Length of cut 3/4″. Overall length 4 1/2″.
Regular edges for cutting soft to medium hard wires. Jaws are set at right angles for getting close to work. Length of cut 3/4″. Overall length 5-1/4″
Regular edges for cutting soft to medium hard wires. Length of cut 5/8″. Overall length 5-1/4″
Regular edges for cutting soft to medium hard wires. Length of cut 5/8″. Overall length 5″.
Just as the title says, these are replacement jaws for the Tapered Nylon Jaw Pliers PLR-828.00.
Simply unscrew the old worn out jaws and replace them with these new jaws.
Replacement Nylon Jaws w/Screws for Eurotool Pliers with Nylon Tipped Jaws
Large, grooved, semi-circular jaws hold rings during filing or polishing. With box joint. Overall length is 5-1/2.
Combination round nose and side cutter. Use for making loops, bends and cutting wire without changing tools. 5-1/4″ Overall length.
Invented by a stone setter, our new Power Set pliers can be used for setting virtually any size stone.
Smooth jaws taper to 1/32″ at tips. Used for making loops, bends, coils and similar operations. Overall length 5 1/4″, length of jaws 1″.
Made originally for the electronics trade, this series of pliers gives the user precise surgeon-like control.
Lightweight stainless steel work pliers have smooth jaws and are completely rust proof. Polished heads prevent marking soft metals. Cushion grip handles. Overall length is 5″.
Engineered particularly for fine work and smaller hands this teal slimline series is designed specifically for beading and wire wrapping.