Polishing Compounds, Motors & Accesories

Recommended for fine finishing and burnishing precious metals, brass, bronze and similar materials with plastic, ceramic or metal media. Supplied with Raytech MFA metal finishing kits. Use approximately 1 tsp. per pint of water.

Standard, fast-cutting tripoli, used when rouge will be used for final finish.

For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.

Linde A for precious gems, gold, silver and other metals.

1 oz. Bottle

For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.

Red rouge for platinum, gold and silver.

Eliminates the mess and does away with broken bars. Peel-back cardboard tube exposes only the amount needed.

For producing a rich, dark luster on white gold, platinum, or silver. 5 oz.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Designed to fit any straight shaft motor. Made with either right or left-handed threads (for right or left side of motor) and held to shaft by set screws. Threads are clear and deep, and the end is pointed. Steel.

Heavy duty for right side. 1/16″ diameter screw.

Designed to hold grinding wheel on right side of motors with 1/2″ straight shaft. For wheels with 1/2″ hole. Steel.

For standard dental taper polishing motors.

For standard dental taper polishing motors.

For standard dental taper polishing motors.

For standard dental taper polishing motors.

Steel with 1/4″ shank.

For tools with 3/32″ shanks. Steel; for right side of motor.

For standard dental taper polishing motors.

For use with wheels up to 3″ diameter and 1/4″ thick, with 1/4″ arbor holes.

For standard dental taper polishing motors.

For right side of motor.

Brush for Flex Shaft Motors. Sold in pairs.

For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.

Medium, 80 mesh.

For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster.

Fine, 150 mesh.

Rock Hard.

Size: 6″ x 1/2″

Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.

Use narrow tape and dispense one roll at a time, or use wide tape up to the width of the dispenser. “In-Line” tape guides keeps tapes separated and easy to lift. Heavy duty steel with non-skid base. Serrated blade cuts tape cleanly and easily. Holds tape with a 3″ core and up to 6″ total tape diameter. Maximum Roll Width 4″.

This addition to our line gives the user the benefit of a device to hold bracelets and rings for polishing. Made of select hardwood the Polishing Gizmo is an indispensable tool for any bench. It is varnished so that the surface will repel rouge. Length 7-3/8″.

This right hand (white) adapter mandrel which fits on a tapered spindle can be used with any 1/8″ hole miniature brush. This enables the user to run brushes such as our metal-hub brushes with a large motor.

Adds high luster and color to gold

For use with hand buffs, brushes, felts and wood laps. Can be mixed with water or fine oil to form a paste that will impart a high luster. Flour, 200 mesh.

For use on polishing motors with mandrels 47.258 or 47.259.  Sold by the dozen.

Brushes with 1/8″ holes can be threaded onto the hardened steel taper, which in turn can be threaded onto a standard tapered spindle. Handy way to use small setting brushes on polishing motors. For left side of motor.

Brushes with 1/8″ holes can be threaded onto the hardened steel taper, which in turn can be threaded onto a standard tapered spindle. Handy way to use small setting brushes on polishing motors. For right side of motor.