Ring Tools
Quality wood clamp with leather-lined jaws for holding rings and other pieces.
Our steel square forming mandrel is great for use when a square corner is needed to bend wire or sheet. Overall length is 12″ with a taper from 6mm – 18mm. Mandrels have a threaded end to accommodate the included square threaded rod allowing use in a vise or hole in bench keeping both hands […]
Our steel square forming mandrel is great for use when a square corner is needed to bend wire or sheet. This mandrel has clipped square corners for more of a rounded square corner. Overall length is 12″ with a taper from 6mm – 18mm. Mandrels have a threaded end to accommodate the included square threaded […]
Only 4 -100mm- long and a narrow .079 -2.0mm- thick this highly tempered opener allows the jeweler easy access to small prongs.
Reduces and enlarges rings without effort. This well-made sizer has six splines on the enlarging mandrel and takes rings up to size 15. The reducing plate has sixteen openings and is smoothly polished to prevent marring. Can be bolted to bench or used as a portable.
Ring is placed on stretcher and the gentle tapping with the mandrel causes ring to expand. Economical and easy to use.
The “Original Ring Adjuster” Ring Snuggies provide a snug fit for a ring on any finger.
Plain, hardened steel mandrel may be used for shaping, straightening and enlarging rings. Also for gauging and holding rings while stone setting.
Grooved for stone set rings and graduated with ring sizes from 1 to 15.
Used for shaping, straightening and enlarging rings. Also for gauging and holding rings while stone setting. Made of hardened tool steel. Graduated with ring sizes from 1 to 15.
Holding a ring mandrel while working is no longer a problem. This rest provides the solution by giving support at both ends. Made of cast iron.
This tool is made to cut with a minimum of discomfort and effort. The blade is hardened alloy and completely enclosed. Quality-made in France. Length 4-1/2″ (115mm).
Replacement Diamond Cutting Wheel for Ring Cutter. This wheel is perfect for cutting hard metals including titanium, stainless steel and platinum. 3/4″ diameter. Made in France.
Handy tool for pushing prongs or crown points around stones. Steel tool mounted in wood handle.
Nicely polished and beveled on one end for smaller mountings this industry standard is tempered to the proper hardness tough but not brittle.
For straightening and bending rings, wires, rods and strips. With smooth box joint. Overall length is 6-1/4″, width of jaws 1-1/4″.
Graduated in quarter sizes from 0 to 15 by US standards. Economical, rigid plastic with groove for stone set rings.
Premium European-made millgrain tools are used for forming decorative edges on settings and bezels. Set of six assorted sizes ranging from 2–12 with premium chuck style handle.
Slice bars, rods and wax ring tubes into tablets with perfectly straight and parallel walls or tapered sides.
A double-ended clamp with thick leather-lined jaws, for holding rings and other jewelry pieces securely while filing, polishing, stone setting, etc.
Enables you to accurately scribe cutting lines when reducing ring sizes. The 12 sizes are graduated in quarter ring sizes from 1/4 to 3. Mark and cut the correct size every time.