Soldering
Browse Subcategories
This 7-1/4 inch tall Max Flame Butane torch not only has a large flame nozzle but also has a larger capacity giving a longer burn time.
Medium lump pumice is heat reflecting and perfect for supporting your project either flat or embedded. 2 lb bag.
This is a hot and handy item for depositing flux or any other liquid exactly where you want it with just an easy squeeze. The bottle has a two ounce capacity.
Well-constructed camel hair brush are noted for durability.
7″ inches long.
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
Works with the BenchMate System for soldering. Platform measures 4″ and easily attaches right to your Benchmate system.
GRS Third-Hand Attachments make precise soldering easy by holding parts in the exact position needed.
A hard soldering paste flux for use on all ferrous and non-ferrous metals and alloys.
14.012, Size #2, Orifice .006″ (.15 mm) – for use with oxygen and acetylene and hydrogen only.
Multiple orifice design gives you maximum melting power and increased versatility for melting platinum, gold, silver or bronze in a crucible.
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Oxygen
Fits Cylinder: Fits disposable oxygen
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Propane
Fits Cylinder: Fits disposable propane
Versatile, magnetic, “third-hand” holder keeps your torch nearby on your bench. Use it right on the stand when you need both hands free. Heavy metal base keeps the holder safely in place and has seven holes for extra tip storage. (Torch not included)
With these tips you get a non-oxidizing flame, so less pickling is required and jewelry comes out cleaner. Changing tips takes only a few seconds to speed up your production (HOKE-JEWEL torch must be purchased separately).
Hoke Jewel Torch for Oxygen & Artifical Gas. Comes with 4 tips.
Hoke Jewel Torch for Oxygen & Natural Gas. Comes with 3 tips.
Replacement Tips for Hoke-Jewel Torch
Replacement Tips for Hoke-Jewel Torch, Oxygen & Natural Gas
The mixing chamber of the Model D blowpipe is designed for use with natural, artificial or bottled gas, but not for acetylene. Produces an intense, perfectly formed flame. Uses 1/4″ hose.
Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 9/16″ – 18 for 3/16″ ID
Multiple orifice design gives you maximum melting power and increased versatility for melting platinum, gold, silver or bronze in a crucible.
Used on tripod, charcoal block, or asbestos, so that work can be heated from below while soldering or enameling. Measures 6″ x 6″.
Electronic torch lighter. Depress activator bar with torch and spark instantly lights torch. Uses 2 AA batteries (not included). Safe and easy to use.
Can be placed over Bunsen burner or alcohol lamp, or used with heating frame (No. 149.0330) so that work can be heated from below while soldering or enameling.
Torch Holder, High bracket-type with narrow top
Torch Holder For Bench, Low bracket-type with wide top
Used on regulators so that standard ID hose can be used. Right hand thread for oxygen. Size: 3/8″ -24 for 3/16″ID
Iron Binding Wire, 22 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
Iron Binding Wire, 27 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
Iron Binding Wire, 29 Gauge, 8 oz spool. Iron Binding Wire used in Jewelry making to hold together parts to be soldered or cemented.
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
A dry, granular acid compound used to pickle gold, silver, and other non-ferrous metal castings.
Solder sheets can be easily cut in clipped pieces. Sheets are placed on bottom jaw and snipped. Pieces drop out cleanly. These can also be used to cut wire solder by inserting the wire into the side hole. Available in size; 1.5 mm.
Twin hose assemblies are supplied with connections (9/16″ fittings). Comes in 10′ length. Hoses are black with color coded lines. Red for fuel and green for oxygen. Included are ferrules and ferrule tools. Made with DuPont™ Kevlar® Fiber
Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.
For hard soldering with flame. Stays put like a paste, will not run like a liquid and yet is transparent. Eliminates blind joint soldering. Jel-Flux produces less oxides and residues, allowing for faster pickling. With no toxic fumes and it’s biodegradable
Single third hand features 6-1/2 pointed tweezer mounted on a weighted base to hold items stable and secure in any position while soldering. Enables user to have both hands free while working.
Used on regulators so that standard ID hose can be used. Left Hand Thread for Fuel Gas. Size: 3/8″ – 24 for 3/16″ ID
For use in low temperature brazing and silver soldering ferrous and non-ferrous metals.
Allows positioning of work while annealing or soldering on a heat reflecting material, such as pumice. Rotates on ball bearings, providing 360 degree access. Pan is 12″ in diameter and comes with 21/2″ lbs. of lump pumice.
For acetylene, with tips 3-7
Includes torch, hoses, curved tips and instructions.
Packaged in display box. Fitting sizes: US-9/16″