Soldering
Browse Subcategories
The mixing chamber of the Model D blowpipe is designed for use with natural, artificial or bottled gas, but not for acetylene. Produces an intense, perfectly formed flame. Uses 1/4″ hose.
Replacement Tips for Hoke-Jewel Torch, Oxygen & Natural Gas
Hoke Jewel Torch for Oxygen & Natural Gas. Comes with 3 tips.
Hoke Jewel Torch for Oxygen & Artifical Gas. Comes with 4 tips.
With these tips you get a non-oxidizing flame, so less pickling is required and jewelry comes out cleaner. Changing tips takes only a few seconds to speed up your production (HOKE-JEWEL torch must be purchased separately).
Versatile, magnetic, “third-hand” holder keeps your torch nearby on your bench. Use it right on the stand when you need both hands free. Heavy metal base keeps the holder safely in place and has seven holes for extra tip storage. (Torch not included)
Multiple orifice design gives you maximum melting power and increased versatility for melting platinum, gold, silver or bronze in a crucible.
14.012, Size #2, Orifice .006″ (.15 mm) – for use with oxygen and acetylene and hydrogen only.
A hard soldering paste flux for use on all ferrous and non-ferrous metals and alloys.
Works with the BenchMate System for soldering. Platform measures 4″ and easily attaches right to your Benchmate system.
Nature’s Touch Citric Acid Pickle is a mild pickling solution used for silver, gold, brass and copper.
Our tungsten soldering pick can withstand higher temperatures than titanium picks. Will not contaminate platinum. Length: 6″.
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.
The 7700 is the basic unit and the biggest seller for a good reason. The 7700 is the crank up window of our soldering irons. The people that use them will use words like, dependable, bullet proof or easy battery change.
This special Firescoff formula offers additional protection for temperature-sensitive metals such as rhodium-plated white gold, gold-filled and silver.
It’s the tried-and-true jewelers’ hard soldering flux. Yellow-green and self-pickling, it is the best in water-based fluxes. Well-mixed to eliminate suspension.
Permits mixing of acetylene with air at the torch head, so no other source of air is necessary.
Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.
This economy model is the ideal tool to hold settings and shanks together for accurate soldering. Length 5-1/2 -140mm-.
A jeweler’s dream for soldering rings when re-sizing. Just fill the cup with cold water and submerge the stone and mounting while soldering the shank to keep the stone cool
Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.
Formulated for extended shelf life versatility and convenience. The gel makes it easy to use and less mess with better results. Non-hazardous.
Medium lump pumice is heat reflecting and perfect for supporting your project either flat or embedded. 2 lb bag.
3pc soldering pick set features 3 colors: blue gold and red to keep you from cross contaminating.
Our solder cutting pliers offer two ways to cut. It cuts sheet solder in 1/16 -1.60mm- squares or wire solder up to 18 gauge in 1/16 -1.60mm- lengths.
Flame can be adjusted by raising or lowering slit sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel.
Flame can be adjusted by raising or lowering split sleeve. Faceted bowl measures 3 3/16″ in diameter and holds 4 oz. of fuel. 1/2″ wick diameter.
Electronic instant-ignition system for push-button start-ups. Both flame and temperature can be adjusted precisely.
Prepared borax for making flux for soldering jewelry. Dissolves easily when rubbed on borax slate. Comes in 4 oz. cone.
Non-asbestos. Flat on one side, with grooves on the other, for holding shanks, chains, etc. Withstands temperatures up to 2000F (1093C). Measures 71/2″ x 71/4″ x 7/8″.
Contain no asbestos. Lightweight blocks reflect heat and perforations hold pins to keep work in place while heating. Withstands temperatures up to 2000F (1093C).
Replacement asbestos free soldering board 6″ x 12″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.
Replacement asbestos free soldering board 6″ x 6″. Withstands temperatures up to 3000F (1640C) for soldering or torch use.
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Select, close-grained, knot-free wood is chemically prepared with a special process for soldering. Easily punctured to hold work. (Not heat rated).
Holds rings, leaving both hands free. Mounted in fixed position on asbestos-free base. Length of rod is 6″.