Soldering
Browse Subcategories
Soft, fire-proof material, into which work or pins can be easily pressed. Measures 6″ x 3″ x 11/2″. Withstands temperatures up to 2000¬_ F (1093¬_ C).
Electronic instant-ignition system for push-button start-ups. Both flame and temperature can be adjusted precisely.
Nature’s Touch Citric Acid Pickle is a mild pickling solution used for silver, gold, brass and copper.
You can pay a lot more and never come close to the quality of this pickle pot. Stainless steel with a stoneware bowl. Sure they call it a crock-pot but it’s the best and most economical pickle pot available. Capacity is 16 oz. with a shipping weight of 2.6 lbs.
The Economical Answer to Safe Soldering! Flame causes fire resistant hose casing to change color, but internal hose remains intact. A hose that is non-flame resistant will melt, creating a dangerous situation. 12′ Pair of Hoses For Little Torch and Gentec Torch, 2 Hose Clamps Included
For Little Torch and Gentec Torch, 2 Hose Clamps Included. 8′ Pair of Hoses. The Economical Answer to Safe Soldering! Flame causes fire resistant hose casing to change color, but internal hose remains intact. A hose that is non-flame resistant will melt, creating a dangerous situation.
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
Standard sodium bisulfate compound is mixed with warm water to make economical solution. Works best at 125 F (52 C).
When this powder is mixed with water or alcohol, it can be used to prevent the flow of solder to unwanted areas, such as a previously soldered joint or the moving parts of a catch.
Size: 1/2 lb. box
For hard soldering with flame. Stays put like a paste, will not run like a liquid and yet is transparent. Eliminates blind joint soldering. Jel-Flux produces less oxides and residues, allowing for faster pickling. With no toxic fumes and it’s biodegradable
Medium lump pumice is heat reflecting and perfect for supporting your project either flat or embedded. 2 lb bag.
Replacement carbon filters for use in our Fume Extractor (CLN-950.00). Pack of two.
Replacement Tip for Iso-Tip Soldering Iron by Wahl (Choose Style)
Replacement Tips for Hoke-Jewel Torch
Replacement Tips for Hoke-Jewel Torch, Oxygen & Natural Gas
Made specifically for the difficult task of holding half or quarter shanks in place while soldering with no fumbling or misalignment. Invented by a bench jeweler.
Grooved work surface disk is 41/2″ in diameter. Rotates on ball bearings, lazy-susan style, providing 360 degree access. Perfect for soldering small parts.
A quick and clean, creamy paste flux for silver brazing and hard soldering. Use with all jewelers’ metals including silver, gold, copper, nickel and platinum. 12 oz.