Waxes & Wax Tools
US made, thermostatically controlled electric pot keeps wax at proper temperature for patching and model making. May also be used as wax and resin dip pot for refractory models. Has 1 pint capacity.
This introductory Wax Modeling Kit is perfect for beginners and students.
Enlarge the finger size of your wax models quickly and accurately. Hardwood mandrel is specially machined to incorporate a cutting steel blade that extends from the handle to the tip on the tapered section. Slide this tool through the hole of wax ring or ring tube and gently rotate clockwise. As the blade turns it scrapes inner wall, enlarging the ring to the size that is marked along the mandrel, leaving a smooth and even finish on the ring.
Slice bars, rods and wax ring tubes into tablets with perfectly straight and parallel walls or tapered sides.
Includes “How To Create Settings In Metal Wire And Wax” by world famous designer Adolfo Mattiello, along with two templates. Shows step-by-step how to make many different settings with drawn metal wire. It also shows how to join settings. The wax working section shows how to make settings with carving wax, prong settings and settings turned on your Matt Mini-Lathe.
Our customers say that this is the world’s best 6pc wax needle file set. The teeth are finer and there are more teeth per inch than others.
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
High quality solid steel mandrel can increase ring size up to size 10.5. Six evenly spaced blades provide even cutting and pressure around wax. Knurled handle provides excellent grip and control. Cutting section of mandrel ranges from 1/2″ (12.7 mm) to 13/16″ (20.3 mm). Cutting mandrel fits ring sizes 1.5 to 10.5.
3-1/8″ L x 1-7/16″ W and assorted thickness from 1/8″ to 1″. Box of 12.
For testing wax temperature during the melting process. All metal with an 8″ long stem and 2″ diameter dial. Readings in both Centigrade and Fahrenheit.
Pliable blue wax wires can be twisted or bent to desired patterns. All pieces are approximately 4″ long.
Contains pliable, round, blue wax wire. Assortment consists of gauges 6, 8, 10, 12, 14, 16, 18, and 20.
Matt Carving Wax Slices, Purple, Assortment of 9 pieces
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
Various shapes and colors for trial use. Also handy for having around in case an odd piece is needed.
Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
1-5/16″ dia. x 11-1/4″
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90 in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/16″ to 1″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. 1 pound box.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.
This idea makes a lot of sense – files made specifically for wax carving. Single cut teeth won’t clog and the files can be held like a pen for good control.
No.3 wire assortment contains: Rectangle: 2, 4, 6, 8, 10 and 12 gauge; Square: 12 and 14 gauge.
4 shapes with different sizes on each end. Can be used at room temperature or heated.
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/32″ to 1/4″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. Overall length 6″.
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 3/8″
Weight: 1 Pound Box
3-3/4″ x 1-1/8″ x 1-1/8″, 1/6 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple Some flexibility. Approximate melting temperature is 240° F (116° C).
Matt Carving Wax Bars, 1/6 Pound, Green, Box of 3
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 1-1/8″ x 3-1/8″, 1/6 pound bars, box of 3.
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 1/4″
Weight: 1 Pound Box
Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.
A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.
1-7/16″ x 1-1/8″ x 3-1/8″, 1/6 pound bars, box of 3.
Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).
6″ long arch-shaped block of carving wax is designed to simplify the construction of bracelets. From one blank style you can create round, oval or square bracelets in a variety of sizes. Simply cut two slices of the desired thickness to form the bracelet, then trim using the Matt Shaper.
Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).
Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125°F.), burns out clean. Overall length 6″.
Green Wax, hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature 230°F (110°C). 1-1/16″ diameter.