Matt Miter Box

Slice bars, rods and wax ring tubes into tablets with perfectly straight and parallel walls or tapered sides.

$50.00
Replacement Tip for Matt Gun, Small

Small replacement tip for Mat Gun Kits 21.0955 and 21.0955/220.

$5.70

Add to cart

Grobet USA® Extruded Sprue Wax, 24″ Length, 3/8″ Diameter

Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.

Diameter: 3/8″

Weight: 1 Pound Box

$16.50

Add to cart

Grobet USA® Extruded Sprue Wax, 24″ Length, 1/4″ Diameter

Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.

Diameter: 1/4″

Weight: 1 Pound Box

$15.70

Add to cart

Ferris Wax, File-A-Wax, Round Bar, Blue

Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).

Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.

1-5/16″ dia. x 11-1/4″

$22.00

Add to cart

Ferris Wax, File-A-Wax, Round Bar, Blue

Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90 in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).

Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.

$22.00

Add to cart

Sprue Wax, 6″ Length, 3/8″ Diameter

Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125° F). Burns out clean. 1 pound box.

$21.55

Add to cart

Square Wax Wire, Gauge 12

Pliable, blue wax wire approximately 4″ long.

$14.25

Add to cart

Round Wax Wires, Gauge 20

Pliable, blue wax wire approximately 4″ long.

$6.80

Add to cart

Round Wax Wires, Gauge 18

Pliable, blue wax wire approximately 4″ long.

$7.50

Add to cart

Round Wax Wires, Gauge 16

Pliable, blue wax wire approximately 4″ long.

$7.50

Add to cart

Round Wax Wires, Gauge 14

Pliable, blue wax wire approximately 5″ long.

$8.15

Add to cart

Round Wax Wires, Gauge 8

Pliable, blue wax wire approximately 4″ long.

$14.25

Add to cart

Round Wax Wires, Gauge 6

Pliable, blue wax wire approximately 4″ long.

$14.25

Add to cart

Half Round Wax Wires, Gauge 10

Pliable, blue wax wire approximately 4″ long.

$7.50

Add to cart

Water Soluble Wax, 1 Pound, Irregular Chucks

Dissolves and washes away in water, making it perfect for use as cores for beads and other hollow items. Other insoluble waxes are worked over these waxes and when immersed in water, a shell remains. Supplied in irregular chunks.

$8.50

Add to cart

Utility Wax, 5″ x 3/16″ Sticks

Easily-shaped waxes that are specially suited for fill-ins and wax repair. Utility waxes can be used to easily correct mistakes or apply sprues to sprue bases. Pliable at room temperature.

$23.45

Add to cart

Sprue Wax, 6″ Length, Gauge 8

Combines flexibility and sufficient rigidity for sprueing and mounting wax patterns. Melts at lower temperature (125°F.), burns out clean. Overall length 6″.

$14.20

Add to cart

Inlay Wax, Regular, 3 oz. Box

A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.

$12.00

Add to cart

Inlay Wax, Hard, 3 oz. Box

A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.

$12.00

Add to cart

Injection Wax, Pink Magna-Ject Beads

Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.

$8.50

Add to cart

Injection Wax, Aqua-Ject Beads

Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.

$10.00

Add to cart

Ferris Wax, File-A-Wax, Wax Slices, 1 Pound Assorted

Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/16″ to 1″.

Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).

$21.80

Add to cart

Ferris Wax, File-A-Wax, Wax Slices, 1/2 Pound Assorted

Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/32″ to 1/4″.

Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).

$17.20

Add to cart

Ferris Wax, File-A-Wax Ring Tube, Flat Side With Hole, Blue

1-5/16″ high x 1-3/16″ wide.

Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).

$12.00

Add to cart

Ferris Wax, File-A-Wax Ring Tube, Center Hole, Purple

7/8″ OD.

Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple, Some flexibility 240° F (116° C).

$6.95

Add to cart

Ferris Wax, File-A-Wax, 1/2 Pound Bar, Green

3-1/2″ x 3-1/2″ x 1-3/8″, 1/2 lb. bar.

Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Green wax cannot be flexed. Approximate melting temperature is 240° F (116° C).

$5.95

Add to cart

Ferris Wax, File-A-Wax, Purple

3-3/4″ x 1-1/8″ x 1-1/8″, 1/6 lb. bar.

Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple Some flexibility. Approximate melting temperature is 240° F (116° C).

$15.95

Add to cart

Wax Melting Pot

US made, thermostatically controlled electric pot keeps wax at proper temperature for patching and model making. May also be used as wax and resin dip pot for refractory models. Has 1 pint capacity.

$136.50

Add to cart

Ferris Wax Assortment, 1 Pound

Various shapes and colors for trial use. Also handy for having around in case an odd piece is needed.

$25.50

Add to cart

Matt Bracelet Blank, Blue

6″ long arch-shaped block of carving wax is designed to simplify the construction of bracelets. From one blank style you can create round, oval or square bracelets in a variety of sizes. Simply cut two slices of the desired thickness to form the bracelet, then trim using the Matt Shaper.

Blue Wax, softer and highly flexible, this wax will take a 90° bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature 220°F (104°C).

$14.40

Add to cart

Matt Ring Tube Sizer

Enlarge the finger size of your wax models quickly and accurately. Hardwood mandrel is specially machined to incorporate a cutting steel blade that extends from the handle to the tip on the tapered section. Slide this tool through the hole of wax ring or ring tube and gently rotate clockwise. As the blade turns it scrapes inner wall, enlarging the ring to the size that is marked along the mandrel, leaving a smooth and even finish on the ring.

$51.85

Add to cart

Matt Wax Rotary File

Rotary file for Matt Mini-Lathe, item #21.02803.

$20.00

Add to cart

Matt Creative Settings Kit, Set of 5

Includes “How To Create Settings In Metal Wire And Wax” by world famous designer Adolfo Mattiello, along with two templates. Shows step-by-step how to make many different settings with drawn metal wire. It also shows how to join settings. The wax working section shows how to make settings with carving wax, prong settings and settings turned on your Matt Mini-Lathe.

$49.95

Add to cart

Matt, Wax for Mini Lathe, Blue

Four pieces, 1-5/16″ diameter, 1-1/2″ long.

$6.30

Add to cart

Replacement Blade for Matt Lathe

Replacement 3-pc blade set.

$21.50

Add to cart

Matt Carving Wax Slices, Purple, Assortment of 12 pieces

3-1/8″ L x 1-7/16″ W and assorted thickness from 1/8″ to 1″. Box of 12.

$33.35

Add to cart

Matt Carving Wax Slices, Purple, Assortment of 9 pieces

Matt Carving Wax Slices, Purple, Assortment of 9 pieces

$26.00

Add to cart

Matt Carving Wax Bars, 1 Pound, Blue

A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.

1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.

$21.00

Add to cart

Matt Carving Wax Bars, 1 Pound, Purple

A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.

1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.

$26.00

Add to cart

Matt Carving Wax Bars, 1 Pound, Green

A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.

1-7/16″ x 3-1/8″ x6-1/2″, 1 pound bar.

$21.00

Add to cart

Matt Carving Wax Bars, 1/2 Pound, Purple

A special wax used in making models to be cast in metal. Can be carved, sawed, filed, machined or turned on a lathe, or melted to build up shapes through layering.

1-7/16″ x 3-1/8″ x 3-1/8″, 1/2 pound bar.

$6.55

Add to cart

JETT Basic Fixturing Compound

Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.

$34.95

Add to cart

Sheet Wax, Pink/Soft, 4″ x 4″, 16 Gauge

Wax sheets in varying thickness, either firm or soft. Designs can be traced directly on sheet and cut with scissors or carving tool.

$23.45

Add to cart

Matt Carving Wax Bars, 1/6 Pound, Green, Box of 3

Matt Carving Wax Bars, 1/6 Pound, Green, Box of 3

$15.90

Add to cart

Ferris Wax Wire Assortment

No.3 wire assortment contains: Rectangle: 2, 4, 6, 8, 10 and 12 gauge; Square: 12 and 14 gauge.

$19.15

Add to cart

Wax Reaming Mandrel 9″

High quality solid steel mandrel can increase ring size up to size 10.5. Six evenly spaced blades provide even cutting and pressure around wax. Knurled handle provides excellent grip and control. Cutting section of mandrel ranges from 1/2″ (12.7 mm) to 13/16″ (20.3 mm). Cutting mandrel fits ring sizes 1.5 to 10.5.

$33.55

Add to cart

Matt Ring Tube, Green, Solid Bar

Green Wax, hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature 230°F (110°C). 1-1/16″ diameter.

$12.75

Add to cart