Waxes & Wax Tools
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
A special wax for building up wax patterns. It can be carved without chipping or flaking and can be softened over a flame, in hot water or with a heated tool. Comes in two grades of hardness, in boxes of approximately 24 sticks 4″ x 1/4″.
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
Excellent flow and high flexibility. This tough wax yields bright surfaces and will not become brittle in storage. Contains a built-in release agent. Sold in 1 pound boxes.
Use to prepare surfaces for soldering, remove excess solders, remove burs, etc. Sharp from handle to tip and can be resharpened on a bench stone.
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 3/8″
Weight: 1 Pound Box
Supplied in the most popular diameters for jewelry work. Wax burns out cleanly and rapidly, eliminating pressure in the pattern. Red sticks, 24″ long.
Diameter: 1/4″
Weight: 1 Pound Box
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/32″ to 1/4″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Assortment of slices measuring 3-5/8″ x 1-1/2″ in varying thicknesses from 3/16″ to 1″.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color, and in a variety of shapes. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
1-5/16″ dia. x 11-1/4″
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Blue wax will bend 90 in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
Saw off a slice to carve coin holders, pendants, earrings, medallions, buckles, bangles and bracelets. Ideal for lathe turning to make carved napkin rings, chessmen, salt and pepper shakers, etc.
3-3/4″ x 1-1/8″ x 1-1/8″, 1/6 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple Some flexibility. Approximate melting temperature is 240° F (116° C).
3-1/2″ x 3-1/2″ x 1-3/8″, 1/2 lb. bar.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Green wax cannot be flexed. Approximate melting temperature is 240° F (116° C).
1-5/16″ high x 1-3/16″ wide.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Blue wax will bend 90° in 1/8″ thickness. Approximate melting temperature is 240° F (116° C).
7/8″ OD.
Ferris File-a-Wax Carving Waxes, used for making models to be reproduced by the lost wax casting process. They can be sawed, filed or carved. Will stand rough handling and will not soften in your hands. Three degrees of hardness, designated by color: Purple, Some flexibility 240° F (116° C).
No.3 wire assortment contains: Rectangle: 2, 4, 6, 8, 10 and 12 gauge; Square: 12 and 14 gauge.
Various shapes and colors for trial use. Also handy for having around in case an odd piece is needed.
This introductory Wax Modeling Kit is perfect for beginners and students.
Phenomenal tools for filing and shaping wax but also exceptional bead or pearl reaming tools.