Watch Movement Tools
This 5 synthetic non-conductive tweezer is ideal for changing watch batteries.
Plastic pads to place over wrist watch dials for protection whilst removing hands.
Plastic pads to place over wrist watch dials for protection whilst removing hands.
Bergeon 30102 Watch Dip Oilers (individual)
Bergeon Red Watchmaker’s pick positions batteries and watch parts without marring by using this 5 1/4in polystyrene tool. BG-6436 has one flat and one pointed end.
Just squeeze and you’ll get the right amount of lightweight oil with rust inhibitors. Plastic spout extension available which enables you to get to those hard-to-reach places.
For making watch parts, loupe springs and many other things requiring spring steel. Tempered and ready for use. Comes in 36″ coils, in B&S gauges as noted.
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 2.0mm
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 4.0mm
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
Compact but very accurate this unit tests watch calculator and camera batteries as well as lithium and mercury cells. Priced right and the quality is assured.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
ETA/Valjoux 7750 Series Plastic Movement Holder
Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.
Oilers Swiss Dip Style Set x4. Includes Red, Black, Blue & Green.
Trays are round at the base and will hold up to an 18 size movement plate. Interlocking design allows the trays to be stackable. Each tray measures approximately 3″ x 3/4″ (76 x 19 mm).
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.80 1.00
18-24 sticks per bundle, depending on diameter.
Stick Length: 7″
Diameter: 6.0mm
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
3 oil holding cups and 3 dip oiler holders. Heavy-duty steel construction with rubber non-slip base.
Horotec movement holder with central screw for caliber 3035
Horotec movement holder with central screw for caliber 2035-2135
Horotec movement holder with central screw for caliber 1530-1570
Replacement needle for Bergeon # 5 Oiler (# 7720-5)
Needle measures 2.1″ inches (54mm) in length and has a diameter 0.8mm
Swiss made
Can also be used to replaced 2720-P
Bestfit Circuit Connector – For repairing of circuit and coil. Made in the USA.
Horotec Adjustable Movement Holder. For Movements from 3-3/4 to 11 Ligne size.
Bergeon slide locking pin vise. Steel jaws with 0 to 1.5mm opening.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold small watch movements from 9 mm (3 ¾ ligne) to 25 mm (11 ligne) in size.
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688
Oscillating Weight Axle Punch for Rolex 1530/1570
Oscillating Weight Axle Punch for Rolex 2130/2135
Oscillating Weight Axle Punch for Rolex 2030/2035
Oscillating Weight Axle Punch for Rolex 3035/3135
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size.
V-slot slips between hub of staff and seat of roller. Lifts roller from balance seat. Extra fine jaws permit use on small and standard sizes. Swiss made.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.