Watch Movement Tools
Bergeon 30102 Watch Dip Oilers (individual)
Trays are round at the base and will hold up to an 18 size movement plate. Interlocking design allows the trays to be stackable. Each tray measures approximately 3″ x 3/4″ (76 x 19 mm).
Plastic pads to place over wrist watch dials for protection whilst removing hands.
Bergeon Red Watchmaker’s pick positions batteries and watch parts without marring by using this 5 1/4in polystyrene tool. BG-6436 has one flat and one pointed end.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size.
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 4.0mm
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 2.0mm
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.
Plastic pads to place over wrist watch dials for protection whilst removing hands.
This 5 synthetic non-conductive tweezer is ideal for changing watch batteries.
Automatic Drop Oiler for Shock Protection Devices and Balance Bearings of all Kinds Without Removing the Cap Jewel. E.G., Incabloc, Kif, setting jewels etc.
Assortment of 7 right hand mainspring winders & 7 left hand arbors for mainsprings
Generic Microstella wrench for regulating the balance on Rolex calibers
Replacement needle for Bergeon # 5 Oiler (# 7720-5)
Needle measures 2.1″ inches (54mm) in length and has a diameter 0.8mm
Swiss made
Can also be used to replaced 2720-P
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Enables the watchmaker to position the balance-cock with his balance-spring, avoiding to pollute the oil on the staff pivot, during the corrections.
V-slot slips between hub of staff and seat of roller. Lifts roller from balance seat. Extra fine jaws permit use on small and standard sizes. Swiss made.
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Horotec movement holder with central screw for caliber 1530-1570
Horotec movement holder with central screw for caliber 3035
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
Bergeon 7100 Movement Holder – specifically for ETA 6497. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
For making watch parts, loupe springs and many other things requiring spring steel. Tempered and ready for use. Comes in 36″ coils, in B&S gauges as noted.
1.20mm forked remover for watch hands, wheels and rollers.
Generic Micro Stella regulator for all Omega Co-Axial 8500
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Bergeon slide locking pin vise. Steel jaws with 0 to 1.5mm opening.
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw. Horotec MSA 03.310 can be substituted if this item is out of stock.
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Oscillating Weight Axle Punch for Rolex 3035/3135
Oscillating Weight Axle Punch for Rolex 2030/2035
Bestfit Circuit Connector – For repairing of circuit and coil. Made in the USA.
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
Oilers Swiss Dip Style Set x4. Includes Red, Black, Blue & Green.
Horotec movement holder with central screw for caliber 2035-2135
Horotec Adjustable Movement Holder. For Movements from 3-3/4 to 11 Ligne size.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
Removes all sizes easily, as well as hands on larger watches. Sturdy jaws and side springs. Pusher blocks have long strokes. Bergeon 30637-2.
Swiss made slide locking jaws are specially designed to hold barrel arbors. 1.00mm diameter opening.
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold small watch movements from 9 mm (3 ¾ ligne) to 25 mm (11 ligne) in size.