Watch Movement Tools
Bergeon 30102 Watch Dip Oilers (individual)
Trays are round at the base and will hold up to an 18 size movement plate. Interlocking design allows the trays to be stackable. Each tray measures approximately 3″ x 3/4″ (76 x 19 mm).
Plastic pads to place over wrist watch dials for protection whilst removing hands.
Bergeon Red Watchmaker’s pick positions batteries and watch parts without marring by using this 5 1/4in polystyrene tool. BG-6436 has one flat and one pointed end.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size.
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 2.0mm
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.
Plastic pads to place over wrist watch dials for protection whilst removing hands.
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 4.0mm
Assortment of 7 right hand mainspring winders & 7 left hand arbors for mainsprings
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
This 5 synthetic non-conductive tweezer is ideal for changing watch batteries.
Automatic Drop Oiler for Shock Protection Devices and Balance Bearings of all Kinds Without Removing the Cap Jewel. E.G., Incabloc, Kif, setting jewels etc.
For making watch parts, loupe springs and many other things requiring spring steel. Tempered and ready for use. Comes in 36″ coils, in B&S gauges as noted.
Enables the watchmaker to position the balance-cock with his balance-spring, avoiding to pollute the oil on the staff pivot, during the corrections.
Generic Micro Stella regulator for all Omega Co-Axial 8500
V-slot slips between hub of staff and seat of roller. Lifts roller from balance seat. Extra fine jaws permit use on small and standard sizes. Swiss made.
Horotec movement holder with central screw for caliber 3035
Generic Microstella wrench for regulating the balance on Rolex calibers
Bergeon slide locking pin vise. Steel jaws with 0 to 1.5mm opening.
Replacement needle for Bergeon # 5 Oiler (# 7720-5)
Needle measures 2.1″ inches (54mm) in length and has a diameter 0.8mm
Swiss made
Can also be used to replaced 2720-P
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Bestfit Circuit Connector – For repairing of circuit and coil. Made in the USA.
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
Horotec movement holder with central screw for caliber 1530-1570
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
Bergeon 31081-TETC Screwdriver with blade to turn ETACHRON pitons. Fine adjustment of the spiral centering between the racket pins
Bergeon 7100 Movement Holder – specifically for ETA 6497. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
1.20mm forked remover for watch hands, wheels and rollers.
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.