Watch Movement Tools
The Freedom automatic small parts cleaner. Five cleaning/rinsing stations, all ultrasonic, and thousands of dollars less expensive than the competition. The Freedom allows the watchmaker the “freedom” to do other tasks while the machine is automatically cycling. Made in the USA.
Assortment of 7 right hand mainspring winders & 7 left hand arbors for mainsprings
Bergeon oscillating weight remover for ETA Calibers 2891-2895, 7750, and 2000-1. Tips store in handle.
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Bergeon 7100 Movement Holder – specifically for ETA 7750 series. Will also work with Sellita SW500. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
Die-cast sturdy oiler -4 cups
Brushed / sanded finish
Replaceable felt pad located in center of oilers
Swiss made
Bergeon 7100 Movement Holder – specifically for ETA 2894-2. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Automatic Drop Oiler for Shock Protection Devices and Balance Bearings of all Kinds Without Removing the Cap Jewel. E.G., Incabloc, Kif, setting jewels etc.
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
Plastic movement holder for positioning hands and checking the chronograph function.
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
Bergeon 7100 Movement Holder – specifically for ETA 6497. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Oscillating Weight Bolt Remover with Two Snap-on Keys. One for ETA 2000-1, 7750, 7751 & 7753 and one for ETA 2892, 2893, 2894 & 2895
For use with ETA calibers: 2892A2, 2893-1-2-3, 2894-2, 2895-2, 2896, 2897.
For use with ETA/Valjoux calibers: 7750/7751/7753/7754
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Removes all sizes easily, as well as hands on larger watches. Sturdy jaws and side springs. Pusher blocks have long strokes. Bergeon 30637-2.
Swiss made slide locking jaws are specially designed to hold barrel arbors. 1.00mm diameter opening.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
Generic Micro Stella regulator for all Omega Co-Axial 3303/3313
Generic Micro Stella regulator for all Omega Co-Axial 8500
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
Generic Microstella wrench for regulating the balance on Rolex calibers
1.20mm forked remover for watch hands, wheels and rollers.
Plastic movement holder for positioning hands and checking the chronograph function of and ETA/Valjoux 7750 movement.
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Micro-stella key used to adjust Rolex balance wheels. Screwing in gives faster rate, screwing out slower rate. Calibers 5602, 5612 and similar Made in China
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
Bergeon 31081 Screwdriver to Remove Etachron Pitons
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Bergeon 31081-TETC Screwdriver with blade to turn ETACHRON pitons. Fine adjustment of the spiral centering between the racket pins
The newest in innovative watch analyzers now offered by EURO TOOL allows users to tell whether the step motor is working or if the battery is dead without opening the watch.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.