Watch Movement Tools
Trays are round at the base and will hold up to an 18 size movement plate. Interlocking design allows the trays to be stackable. Each tray measures approximately 3″ x 3/4″ (76 x 19 mm).
Plastic pads to place over wrist watch dials for protection whilst removing hands.
Reversible brass holder will take all shapes and sizes up to 12 1/2″ lignes.
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
This 5 synthetic non-conductive tweezer is ideal for changing watch batteries.
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 2.0mm
18-24 sticks per bundle, depending on diameter.
Stick Length: 5-3/4″
Diameter: 4.0mm
18-24 sticks per bundle, depending on diameter.
Stick Length: 7″
Diameter: 6.0mm
For making watch parts, loupe springs and many other things requiring spring steel. Tempered and ready for use. Comes in 36″ coils, in B&S gauges as noted.
Oscillating Weight Axle Punch for Rolex 3035/3135
Oscillating Weight Axle Punch for Rolex 2130/2135
Oscillating Weight Axle Punch for Rolex 2030/2035
Oscillating Weight Axle Punch for Rolex 1530/1570
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
Oilers Swiss Dip Style Set x4. Includes Red, Black, Blue & Green.
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Horotec movement holder with central screw for caliber 3035
Horotec movement holder with central screw for caliber 2035-2135
Horotec movement holder with central screw for caliber 1530-1570
The Freedom automatic small parts cleaner. Five cleaning/rinsing stations, all ultrasonic, and thousands of dollars less expensive than the competition. The Freedom allows the watchmaker the “freedom” to do other tasks while the machine is automatically cycling. Made in the USA.
Set of three tools for assembling and dismantling “Kif Trior” shock-absorbers. Supplied with 3 tubes of 5 springs of one type. Swiss Made.
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Tool on stand for removing rollers. Hole puncher with cracked hardened plate on both sides, “V” shape to remove the adjusted plate on a balance staff.
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Oscillating Weight Bolt Remover with Two Snap-on Keys. One for ETA 2000-1, 7750, 7751 & 7753 and one for ETA 2892, 2893, 2894 & 2895
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
Gain precise control by holding the staking tool vertically while pressing the hands. Includes eight stakes: flat conical, flat nylon tip and six with holes of .50-1.70mm.
The HOROTEC© Flashtest is an advanced, multifunctional and portable tester for analog quartz watches and movements.
The Horotec demagnetizer is an electronic demagnetizer for very small parts such as hairsprings, watch wheels and mainsprings. You can even demagnetize tweezer tips and screwdriver blades.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
Horotec Adjustable Movement Holder. For Movements from 3-3/4 to 11 Ligne size.
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
ETA/Valjoux 7750 Series Plastic Movement Holder