Watch Movement Tools
Micro-stella key used to adjust Rolex balance wheels. Screwing in gives faster rate, screwing out slower rate. Calibers 5602, 5612 and similar Made in China
ETA 2892A2/2824-2 Movement Holder Movement Holder for watch repair. Clear Acrylic.
Plastic movement holder for positioning hands and checking the chronograph function.
Plastic movement holder for positioning hands and checking the chronograph function of and ETA/Valjoux 7750 movement.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
Oscillating weight holder for removing or installing ETA 7750 weight bolt. Can be used on calibers ETA 7750, A07.111, A07.161, A07.271.
Replacement needle for Bergeon # 5 Oiler (# 7720-5)
Needle measures 2.1″ inches (54mm) in length and has a diameter 0.8mm
Swiss made
Can also be used to replaced 2720-P
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw. Horotec MSA 03.310 can be substituted if this item is out of stock.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.
For use with ETA calibers: 2892A2, 2893-1-2-3, 2894-2, 2895-2, 2896, 2897.
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
The Freedom automatic small parts cleaner. Five cleaning/rinsing stations, all ultrasonic, and thousands of dollars less expensive than the competition. The Freedom allows the watchmaker the “freedom” to do other tasks while the machine is automatically cycling. Made in the USA.
Bergeon 7100 Movement Holder – specifically for ETA 2894-2. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
ETA/Valjoux 7750 Series Plastic Movement Holder
Bergeon 31081 Screwdriver to Remove Etachron Pitons
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
For use with ETA/Valjoux calibers: 7750/7751/7753/7754
Oscillating Weight Axle Punch for Rolex 3035/3135
Oscillating Weight Axle Punch for Rolex 2030/2035
Oscillating Weight Axle Punch for Rolex 2130/2135