Watch Movement Tools
Horotec Adjustable Movement Holder. For Movements from 3-3/4 to 11 Ligne size.
Bestfit Circuit Connector – For repairing of circuit and coil. Made in the USA.
Bergeon slide locking pin vise. Steel jaws with 0 to 1.5mm opening.
Horotec Adjustable Movement Holder. For Movements from 8-3/4 to 19 Ligne size
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold small watch movements from 9 mm (3 ¾ ligne) to 25 mm (11 ligne) in size.
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688
Oscillating Weight Axle Punch for Rolex 1530/1570
Oscillating Weight Axle Punch for Rolex 2130/2135
Oscillating Weight Axle Punch for Rolex 2030/2035
Oscillating Weight Axle Punch for Rolex 3035/3135
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size.
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Enables the watchmaker to position the balance-cock with his balance-spring, avoiding to pollute the oil on the staff pivot, during the corrections.
Reversible brass holder will take all shapes and sizes up to 12 1/2″ lignes.
V-slot slips between hub of staff and seat of roller. Lifts roller from balance seat. Extra fine jaws permit use on small and standard sizes. Swiss made.
Set of three tools for assembling and dismantling “Kif Trior” shock-absorbers. Supplied with 3 tubes of 5 springs of one type. Swiss Made.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw. Horotec MSA 03.310 can be substituted if this item is out of stock.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
The newest in innovative watch analyzers now offered by EURO TOOL allows users to tell whether the step motor is working or if the battery is dead without opening the watch.
Bergeon 31081-TETC Screwdriver with blade to turn ETACHRON pitons. Fine adjustment of the spiral centering between the racket pins
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
Bergeon 31081 Screwdriver to Remove Etachron Pitons
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
Micro-stella key used to adjust Rolex balance wheels. Screwing in gives faster rate, screwing out slower rate. Calibers 5602, 5612 and similar Made in China
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Plastic movement holder for positioning hands and checking the chronograph function of and ETA/Valjoux 7750 movement.
1.20mm forked remover for watch hands, wheels and rollers.
Generic Microstella wrench for regulating the balance on Rolex calibers
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
Generic Micro Stella regulator for all Omega Co-Axial 8500
Generic Micro Stella regulator for all Omega Co-Axial 3303/3313
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Swiss made slide locking jaws are specially designed to hold barrel arbors. 1.00mm diameter opening.
Removes all sizes easily, as well as hands on larger watches. Sturdy jaws and side springs. Pusher blocks have long strokes. Bergeon 30637-2.