Watch Movement Tools
The newest in innovative watch analyzers now offered by EURO TOOL allows users to tell whether the step motor is working or if the battery is dead without opening the watch.
Just squeeze and you’ll get the right amount of lightweight oil with rust inhibitors. Plastic spout extension available which enables you to get to those hard-to-reach places.
Generic Micro Stella regulator for all Omega Co-Axial 8500
Generic Micro Stella regulator for all Omega Co-Axial 3303/3313
Enables the watchmaker to position the balance-cock with his balance-spring, avoiding to pollute the oil on the staff pivot, during the corrections.
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
Tool on stand for removing rollers. Hole puncher with cracked hardened plate on both sides, “V” shape to remove the adjusted plate on a balance staff.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw.
3 oil holding cups and 3 dip oiler holders. Heavy-duty steel construction with rubber non-slip base.
Trays are round at the base and will hold up to an 18 size movement plate. Interlocking design allows the trays to be stackable. Each tray measures approximately 3″ x 3/4″ (76 x 19 mm).
1.20mm forked remover for watch hands, wheels and rollers.
For making watch parts, loupe springs and many other things requiring spring steel. Tempered and ready for use. Comes in 36″ coils, in B&S gauges as noted.
Plastic pads to place over wrist watch dials for protection whilst removing hands.
Reversible brass holder will take all shapes and sizes up to 12 1/2″ lignes.
Bergeon 30102 Watch Dip Oilers (individual)
Novodiac Shock Spring Tool, CAL. ETA 2801 / 2824-2 / 2834-2 / 2836-2
Novodiac Shock Spring Tool, CAL. ETA 2660 / 2671 / 2688
Oscillating Weight Axle Punch for Rolex 1530/1570
Bestfit Circuit Connector – For repairing of circuit and coil. Made in the USA.
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
Bergeon 7100 Movement Holder – specifically for ETA 6497. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Bergeon 7100 Movement Holder – specifically for ETA 7750 series. Will also work with Sellita SW500. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
Bergeon 31081-TETC Screwdriver with blade to turn ETACHRON pitons. Fine adjustment of the spiral centering between the racket pins
For use with ETA/Valjoux calibers: 7750/7751/7753/7754
Oscillating Weight Axle Punch for Rolex 2130/2135
Oscillating Weight Axle Punch for Rolex 2030/2035
Oscillating Weight Axle Punch for Rolex 3035/3135
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
Bergeon 31081 Screwdriver to Remove Etachron Pitons
ETA/Valjoux 7750 Series Plastic Movement Holder
Bergeon 7100 Movement Holder – specifically for ETA 2894-2. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
The Freedom automatic small parts cleaner. Five cleaning/rinsing stations, all ultrasonic, and thousands of dollars less expensive than the competition. The Freedom allows the watchmaker the “freedom” to do other tasks while the machine is automatically cycling. Made in the USA.
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
For use with ETA calibers: 2892A2, 2893-1-2-3, 2894-2, 2895-2, 2896, 2897.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw. Horotec MSA 03.310 can be substituted if this item is out of stock.