Watch Tools
Browse Subcategories
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
Similar to pattern No. 4, except have very narrow needle-like points.
“Jaxa” Style Case Wrench for Oversize Watches. Fits watches 18-62mm. 3 sets of 4 different pin types. Opens all sizes and shapes of waterproof cases.
Enables the watchmaker to position the balance-cock with his balance-spring, avoiding to pollute the oil on the staff pivot, during the corrections.
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
Two light sources in one loupe! Use this Triplet 10X Lighted Loupe in low light environment or when extra light is desired.
Reversible brass holder will take all shapes and sizes up to 12 1/2″ lignes.
Dumont Inox 08 #5A Tweezers, 4 1/2″. Oblique tips to work under microscope or magnification.
Bergeon 7026 #3C Style Swiss Made Tweezers. Length 110mm.
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
The hardwood stand offers just the right degree of angle to make seeing and choosing the correct screwdriver as easy as possible.
Similar to pattern No. 4, except have very narrow needle-like points. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Very Sharp
Swiss-made Gucci Screw Removing Tool is perfect for removing bracelet screws from Gucci and other high fashion watches.
Spare pin set for L-G Master Case Opener – CWR-600.00
Remover for screw type case backs. This model is popular with many watchmakers offering a large surface for grasping and adjustable claws.
This affordable 5X magnifier lamp offers the user a portable solution to viewing anything small. With a 4 lens see all the details and work with greater ease and better results
Dumont Dumoxel Pattern #2 Tweezer, Anti-Magnetic Stainless Steel
Allows easy fitting of the barrel cover with drum. Ø25.00mm x 19mm. This quality professional Swiss made double sided holder has a removable and adjustable center support screw. Horotec MSA 03.310 can be substituted if this item is out of stock.
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
Metal: Non-Magnetic Stainless Steel, Length: 4-3/4″, Point: Sharp
Serrated, grooved, spring action jaws open and close with large wing nut. Handles are hollow so that long wire will pass through. Two jaw widths are available. Both open to 1/4″. Overall length is 4-1/2″.
Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.
Made of the highest quality optical glass, this Optivisor 2.75X (#7) lens plate has a 6 inch focal length.
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
Set of three tools for assembling and dismantling “Kif Trior” shock-absorbers. Supplied with 3 tubes of 5 springs of one type. Swiss Made.
Made of the highest quality optical glass, this OptiVISOR® 2.5X (#5) lens plate has a 8″ focal length.
Bergeon 7026 #5 Style Swiss Made Tweezers. 110mm length.
It is great for curing ultraviolet glue for mineral watch crystal assembly, diamond grading, and other jewelry repairs.
Made of the highest quality optical glass, this Optivisor 2.75X (#7) lens plate has a 6 inch focal length.
Made of the highest quality optical glass, this OptiVISOR® 3.5X (#10) lens plate has a 4″ focal length.
This hand tool comes with with two different styled “Peek Stick” ends, pick shaped and beveled end. Ends are replaceable.
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
Available in white only. Measures 2 3/4″ x 1″. Sold by box of 1000.
Soft and will not scratch the parts. Matches the shape of watch cases with different geometries.
Two lenses can be used singly or in combination.
Powers 4x & 5x, total 9x.
Watch crown winding tool made of black anodized aluminum. Swiss made.
Shorter version of pattern No. 3. Overall length 4-1/2 inches (114 mm).
Slightly soft and flexible allowing to execute various works such as assembly, casing and control in optimal conditions thanks to a better contrast with the different colors.