Watch Tools
Browse Subcategories
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
With a revolutionary micro fiber that will not snag or shed it is the optimal texture and softness for cleaning film from precious stones especially diamonds.
With pointed shank. Overall length 4-3/4 inches (121 mm). Sharp points.
Choose from 5.3(yellow) & 6.0(blue) case tube remover for Rolex.
Extremely high quality European-made tweezers with medium serrated tips that grip and hold even the most delicate objects securely without damage.
Metal: Nickel Plated Carbon
Length: 5-1/8″
Point: Sharp
Transverse end cutter with rounded cutting edge. Overall length 3-3/4 inches (95 mm). Carbon Steel.
Metal: Nickel Plated Carbon
Less expensive version of pattern No. 3; points are not as precision finished. Overall length 4-3/4 inches (121 mm)
Metal: Stainless Steel
Point: Sharp
Similar to pattern No. 4, except have very narrow needle-like points. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Very Sharp
Shorter version of pattern No. 3. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Sharp
Boley style tweezers are excellent general utility tweezers.
Closing pressure is easily adjusted with these slidelock tweezers. Rounded serrated points.
Closing pressure is easily adjusted with these slidelock tweezers. Sharp, smooth points.
Boley style tweezers are excellent general utility tweezers. All shanks are tapered and have beveled edges, except the GG pattern. Non-magnetic brass version of pattern MM.
Swiss Pattern Tweezer, Grobet USA Brand, Pattern #3C
Set of three tools for assembling and dismantling “Kif Trior” shock-absorbers. Supplied with 3 tubes of 5 springs of one type. Swiss Made.
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
This rack features a 7-1/2″ bar area for easy accessibility to your favorite pliers. Two “tray extensions”, each with two round depressions, for holding small parts or bits of solder.
Zenith’s chemists developed this unique ammoniated cleaner – without the ammonia fumes. It is considered safe and environmentally friendly.
V-slot slips between hub of staff and seat of roller. Lifts roller from balance seat. Extra fine jaws permit use on small and standard sizes. Swiss made.
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
Oilers Swiss Dip Style Set x4. Includes Red, Black, Blue & Green.
Moebius Microgliss D-5, 20ml. Mineral oil for high-pressure bearings. Viscosity 1200 cSt at 20° Celsius
Replacement Tip for Iso-Tip Soldering Iron by Wahl (Choose Style)
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.
The 7700 is the basic unit and the biggest seller for a good reason. The 7700 is the crank up window of our soldering irons. The people that use them will use words like, dependable, bullet proof or easy battery change.
“Jaxa” Style Case Wrench for Oversize Watches. Fits watches 18-62mm. 3 sets of 4 different pin types. Opens all sizes and shapes of waterproof cases.
Precision screwdrivers with hex shaped heads, heat treated blades range from size .80 to 2 mm. Set of 6 in plastic pouch.
Spring action holds screwdriver firmly in place. Steel wheels are carefully set into body to provide even action when wheeled over stone. Overall width is 19/16″ (40mm).
Swiss Pattern Screwdriver Set in Plastic Box- 7 pieces
Snap those stubborn pins out in a hurry with this clever device.
This upgraded pin removing tool is attractive aluminum with three long pins: 0.70, 0.80 and 0.90mm and three short pins: 0.70, 0.80 and 0.90mm diameter.
This link pin remover set comes complete with 10 pins in sizes: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.50 and 2.00mm.
This box holds small and large packages and has removable dividers which keep boxes upright to easily identify the size and shape.
Our HANDY BLOCK is a 4-1/2″ x 6″ block of cured hardwood with 88 holes for organizing burs, needle files, beaders, mini brushes, etc.
For opening oyster-shaped cases made by Rolex. Includes the wrench and six dies in the appropriate sizes: 18.5 20.2 22.5 26.5 28.3 and 29.5mm.
Remover for screw type case backs. This model is popular with many watchmakers offering a large surface for grasping and adjustable claws.
A must for every watchmaker this movement holder clamps onto the edge of your bench. The holder is made of metal and will hold any size movement.
Easy-to-use sliding clamp is great for securely holding a variety of parts while working. Spring-operated with plastic posts which will not mar or scratch your piece.
Check the price and you will agree that this is a great value. Our holder is very well made and comparable to holders at twice the price. Maximum opening: 30mm.
Made for pocket and large watches popular today. Well-made solid metal holder fits in any bench vise.
It is great for curing ultraviolet glue for mineral watch crystal assembly, diamond grading, and other jewelry repairs.
This sturdy, durable padded work mat has a non-slip backing for a clear, level and comfortable work surface.
Set of 3 Pins for L-G Opener “Knurled Type Cover”
Set of 3 Pins for L-G Opener “Multinotch cover”