Watch Tools
Browse Subcategories
Bergeon Scratch Brush Refills-12 piece pack
You save (%)
Bergeon fiber brush pen for cleaning rust from small parts, fiberglass diameter is 1.5mm and 4 inches long. Refills are available.
You save (%)
Flat pliers with plastic jaws. Nickel-plated. Interchangeable jaws. Length 135 mm. Width of jaws 10 mm.
You save (%)
This is the double ended replacement tip for Bergeon Swiss Made Spring Bar Tool (6111). The tip is reversible with a pointed tip on one end and a forked tip on the other.
You save (%)
1.20mm forked remover for watch hands, wheels and rollers.
You save (%)
Drum barrel made to fit over a standard watchmaker’s screwdriver to give you a better grip and more torque. With a knurled finish, the barrel attaches to screwdriver with a set-screw. 4 sizes available.
You save (%)
First quality rotating stand with 9 screwdrivers from Bergeon. Very stable stand with adherent rubber plate.
You save (%)
Self adhesive. Stops tools rolling on the work bench.
You save (%)
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
You save (%)
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
You save (%)
Bergeon Luminous Paste Varnish – refill for BG5680. Mix with luminous powder and thinner.
You save (%)
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
You save (%)
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
You save (%)
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Red
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Green
You save (%)
Bergeon Dip Oiler w/2 Spare Tips Blue
You save (%)
Soft and will not scratch the parts. Matches the shape of watch cases with different geometries.
You save (%)
Casing cushion “Large size”. With a synthetic ring. Central hollowed felt covered, with stamoïd, non-scratching the crystals and the cases. Provided with nonskid coating. Height: 15 mm.
You save (%)
Bergeon 5011-B Replacement Key for Crown & Stem Removal
You save (%)
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
You save (%)
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
You save (%)
Similar to pithwood, Polypivot king’s wood (soft wood) is good for cleaning small parts and tips of oilers.
You save (%)
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
You save (%)
Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable crystal without tension ring.
You save (%)
Assortments of 3 Bergeon screwdrivers with 1 spare blade per diameter.
In cardboard box. First quality, chromium-plated. Sizes ø 0.50 – 0.60 – 0.80 mm.
You save (%)
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.
You save (%)
Tool for fitting and removing spring-bars from watch bands. With standard points and forks, replacement tips available. See 3153A or 3153B.
You save (%)
Watch crown winding tool made of black anodized aluminum. Swiss made.
You save (%)
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2801, 2824-2, 2834-2 and 2836-2. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
You save (%)
Bergeon 31081 Tool for NOVODIAC® shock Spring, ETA 2660, 2671 and 2688. Anodized aluminium handle, tip in hardened stainless steel 54 HRC.
You save (%)
Bergeon 31081-TETC Screwdriver with blade to turn ETACHRON pitons. Fine adjustment of the spiral centering between the racket pins
You save (%)
Bergeon 31081 Screwdriver to Remove Etachron Pitons
You save (%)
Screwdriver with adapted blade to adjust the eccentric screw of the minute counter for the calibre range ETA Valjoux 7750.
You save (%)
Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. For removing wheels on third wheel arbors and for chronograph driving wheels with 5 spokes. Blue handle.
You save (%)
Bergeon 30610 Barrel Arbor Holder, .75mm. Slide locking jaws.
You save (%)
Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.
You save (%)
Bergeon slide locking pin vise. Steel jaws with 0 to 1.5mm opening.
You save (%)
Beregon 30409-C watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 4.0-5.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
You save (%)
Beregon 30409-A watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 3.0-4.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
You save (%)
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.60-0.70mm
You save (%)
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.40-0.50mm
You save (%)
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
You save (%)
Bergeon 30102 Watch Dip Oilers (individual)
You save (%)
5 pieces set in pouch. Includes: 0.80-1.00-1.20-1.40-1.60. Hardened stainless steel blades. Swiveling hexagonal head in self lubricating, synthetic POM (Derlin) material.
You save (%)
5 pieces set in pouch. Includes: 1.20-1.50-2.00-2.50-3.00. Hardened stainless steel blades. Swiveling hexagonal head in self lubricating, synthetic POM (Derlin) material.
You save (%)
Set of 4 screwdrivers with hexagonal blades. 54/56 HRC Hardened stainless steel blades. In plastic storage pouch. Includes sizes: 1.50mm, 2.00mm, 2.50mm & 3.00mm
You save (%)
The drum allows increased screwing force. Sizes available: Ø 1.00 – 1.20 – 1.40 – 1.60 – 1.80 mm.
You save (%)
Swiss Made Bergeon screwdriver set. Set includes sizes: Ø 0.50 – 0.60 – 0.80 – 1.00 – 1.20 mm. Replacement blades available here.
You save (%)
Replacement blades for the 30080 series screwdrivers.
You save (%)
Three piece Bergeon pin vice assortment. Sizes included: 0.0-0.5mm 0.5-1.0mm/1.0-1.5mm 1.0-1.5/1.50-2.0mm
You save (%)
Made of hardened steel with mirror polished tips. Notched for easier positioning. Anodized aluminum handles. Tips are 2.5mm wide by 0.15mm thick. These are probably the best hand levers on the market.
You save (%)
Assortment of 24 burs for jewelers In tool steel. Fine cut. First quality. Shank: Ø 2.35 mm. Total length: 44.5 mm. Burs Ø 3 – 4- 6 mm.
You save (%)
V-slot slips between hub of staff and seat of roller. Lifts roller from balance seat. Extra fine jaws permit use on small and standard sizes. Swiss made.
You save (%)
For use with ETA/Valjoux calibers: 7750/7751/7753/7754
You save (%)