Watch Tools
Browse Subcategories
MTG-4000 testing device for mechanical watches. Complete, multifunctional model for professional use. Functions : – Measurement of beat rate (sec/day), mechanical watch beat error m/s and watch beat diagram – Acoustic watch beat simulation (can be switched off) – Amplitude measurement over a range of 90° to 350°, lift angle selection from 30° to 60° […]
Waterproof tester up to 10 bars used with water The pressure is generated by a manual pump Leaks revealed by bubble stream Manual release valve for safety Cylinder is 80mm inside diameter, suitable for 2 watches Dimensions: 170 x 200 x 270mm Made in Italy Instructions included
Horofix Replacement Screws for Screwdrivers, 2pk. For the 2100 series screwdrivers.
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
Cover all your bases with this 7 piece Luxor polishing compound set. From pre-polishing to final high shine luster, this set has it all. Use with felt or cotton buffs.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.
#5 Stainless Steel Economy Tweezers Metal: Stainless Steel Length: 4-1/2″ Point: Very Sharp
Oscillating weight holder for removing or installing ETA 2892 weight bolt. Can be used on calibers ETA 2892, 2893, 2894, 2895, 2896, 2897.
Economical screwdriver with steel blade set firmly in metal handles. Hexagonal swivel head prevents rolling on bench. Overall length proportional with blade size and range. Style 5, 1.20mm.
Sturdy, quick acting tool for removing all types of hands from watches and instruments. Hands are removed by pushing downward on the plunger-type handle. Center post acts as a guide and holds hands after removal.
Metal: Stainless Steel
Length: 4-1/2″
Point: Sharp
Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.
For use with wheels having 1/16″ arbor holes. Sold by dozen.
This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.
Now available in a high-impact, plastic gray color with more slots, including one which is extra wide for larger bracelets. Allows the repairer to tap out pins or take out and replace screws easily. Take the struggle out of band sizing. 2″ x 2-1/2″ x 1″.
- Overall length: 120mm (4.72″)
- Jaws: Round Nose, Very Fine
- Jaw length: 20mm (0.79″)
- Tip width: 0.7mm
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
One jaw is half-round and the other is round. Overall length is 5-1/2″.
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)