Watch Tools
Browse Subcategories
Horotec Key For Screw-on tubes Ø 3.00 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
You save (%)
Horotec Key For Screw-on tubes Ø 2.95 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
You save (%)
Horotec Key For Screw-on tubes Ø 2.75 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
You save (%)
Horotec Key For Screw-on tubes Ø 2.65 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
You save (%)
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
You save (%)
Replacement tips (needles) for Horotec Incabloc Oiler. Sold as one piece each.
You save (%)
Precision Incabloc oiler with a gilt aluminum handle and three spare tips included.
You save (%)
Assortment of hands fitting tools, equipped with Delrin® driven stakes. Knurled handle in anodized aluminum. Sizes: Flat-.80mm .50-1.00mm .65-1.10mm 1.50-2.00mm
You save (%)
Horotec Hand Remover Set, 4mm width. Works for many pocket watch hands.
You save (%)
Horotec Hand Remover Set, 2.5mm width
You save (%)
Green dip oiler with a medium point. 2 spare needles are stored inside the handle. Swiss Made
You save (%)
This Horotec bench mat is ultra thin yet sturdy. Mat has slightly sticky backing that allows it to stay in place, while also allowing for easy repositioning. It is roughly the same size as other bench mats at 13 3/4″ x 9 1/2″ x 0.1″.
You save (%)
Horotec Flash Test is designed to be used on quartz watches with the cases opened or closed. Easily check for electronic circuit pulse, test battery voltage, and un-jam train wheels.
You save (%)
This steel tool is used to install the Rolex® screw on pushers into a Rolex® watch case. McCaw Co. is independent of and not affiliated with or sponsored by Rolex®. Warranty does not apply to non-genuine parts supplied by McCaw Co.
You save (%)
Set of double-ended wheel countersinks in tempered steel – 4 pieces Our set includes 4 double-ended wheel countersinks made of high-quality tempered steel, perfect for watchmaking and precision tasks. Specifications: Wheels diameters: 1.80-2.10 / 2.50-3.00 / 3.50-4.00 / 4.50-5.00 mm Delivered in a convenient plastic pouch for easy storage and transportation.
You save (%)
Horotec Concave Delrin Die. For replacement of delrin die on Maxi-Press & Mini Press.
You save (%)
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
You save (%)
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
You save (%)
Reversible case cushion in anti scratch synthetic material.
You save (%)
Casing cushion with a gray anodized aluminum ring. 75mm in diameter.
You save (%)
Blue dip oiler with a fine point. 2 spare needles are stored inside the handle. Swiss Made
You save (%)
Black dip oiler with a very fine point. 2 spare needles are stored inside the handle. Swiss Made
You save (%)
Non-marring copper beryllium, non magnetic, perfect for delicate work on watch cases or jewelry. Made in France. Includes rotating stand. Screwdriver sizes 0.50-3.00mm.
You save (%)
Swiss Made Set of 10 Horotec Ball Bearing Screwdrivers, Sizes: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 1.80, 2.00, 2.50, and 3.00 mm.
You save (%)
Oil cup in yellow anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
You save (%)
Oil cup in red anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
You save (%)
Oil cup in green anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
You save (%)
Oil cup in blue anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
You save (%)
Assortment of 4 anodized aluminum oil cups with ceramic cups. The oil cups can be used individually or on the base plate.
You save (%)
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
You save (%)
Aluminum tweezers with curved, fine PEEK tips. Tips are replaceable. Use MSA12.765-A for replacements. 4 3/4″ in length.
You save (%)
Aluminum tweezers with very fine PEEK tips. Tips are replaceable. Use MSA12.764-A for replacements. 4 3/4″ in length.
You save (%)
Aluminum tweezers with fine PEEK tips. Tips are replaceable. 4 3/4″ in length.
You save (%)
Screwdriver sizes include: 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.0, 2.5 & 3.0. Replacement blades included. Swiss made.
You save (%)
Assortment of 9 watchmakers screwdrivers with ball bearing heads. This set is in a nice wooden case and includes nine spare blades and two spare set screws. Sizes included: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm.
You save (%)
Screwdriver sizes include: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50. One replacement per size included. Rotating stand is made of solid aluminum and has a non-skid base. Top quality screwdriver set.
You save (%)
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
You save (%)
HOROTEC 01.020-C Watchmakers Screwdriver set with Aluminium Handles and Delrin comfortable head
Assortment of 10 watchmaker screwdrivers MSA01.020-C
You save (%)
Horotec #S5C brass tweezers with bent tips. Non-marring, perfect for delicate work. 5 1/4″ length.
You save (%)
Horotec #S5 bronze tweezers. Fine Tips, non-marring. 5″ in length.
You save (%)
Horotec #S5 brass tweezers. Non-marring, can be used for hand or hairspring work. 4 3/4″ length.
You save (%)
Easily removes spring bars without having to take off the clasp. Angled for easier use. Tips are reversible, with an extra pair included. Hex driver to change tips included. Size: 4 1/2″ x 1 3/4″ Max opening is 32mm.
You save (%)
Easily removes spring bars without having to take off the clasp. Tips are reversible, with an extra pair included. Hex driver to change tips included. Size: 4 1/2″ x 1 3/4″ Max opening is 32mm.
You save (%)
Horofix Replacement Screws for Screwdrivers, 2pk. For the 2100 series screwdrivers.
You save (%)
Designed to match the Rolex* 2100 tool for adjusting Submariner Oyster bracelet. Large knurled, barrel grip helps with increased torque on those stubborn screws.
Includes 2 reversible blades.
You save (%)
Punch 2mm holes in leather or plastic bands with this handy plier. Great for sizing bands. Length 5-1/2 -145mm-.
You save (%)
Cuts smooth, clean holes in leather watchbands. Plated steel with contoured handle for comfort.
Overall length is 5″ (127 mm).
You save (%)
Used as a base for riveting, drilling and staking small parts, our hex anvil is case hardened and well polished for long life.
You save (%)