Watch Tools
Browse Subcategories
Horotec MSA03.017 Tool For Oscillating Weight Bolts For Rolex Caliber 3235.
Aluminum tweezers with interchangeable tips made of soft, white Delrin. Used for handling delicate pieces without marking them. Tips are replaceable if they become damaged or worn out.
MSA12.723-A. Replacement tips for MSA12.723. Made of soft white delrin. Sold as a pair.
Bestfit Springbar Removing Tool. Includes fine point and forked tip.
Knurled stainless steel screw drivers with anodized aluminum ball bearing heads. Hardened blue steel blades. Comes in a convenient pouch for easy storage. Sizes included: .60, .80, 1.00, 1.20
Glass bottle for Epilame with a built in steel mesh basket for holding small parts. Use with Moebius Fixodrop or other epilame. With your epilame fluid in the bottle place your watch part in the steel mesh basket and insert in the top half of the bottle. Replace cap and turn up side down to […]
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 49x41x16
Foam insert for parts trays. Use these with Watch Repair Trays SKU# 152.0701. Measures 232x48x15mm
Casing cushion with a gray anodized aluminum ring. 75mm in diameter.
Chromed Brass Classic Screwdrivers, standard blades. 3 extra blades and pouch.
Jett Basic is a unique, easy-to-use compound formulated from an advanced thermoplastic material. Quick-to-set, non-toxic, biodegradable, it will not stick to, scratch or damage metal parts and can be re-used again and again. Contains no ceramic content so it gives a softer and a slightly pliable feel to it. No special tools required and will not chip or break. Can be re-used again and again. Contains 1 lb.
The fully adjustable drill press stand made of high-quality material, small enough to easily fit on your workbench but tough enough for any project! A lever-action drill stand for quick, efficient, and precise work. Compatible with the Standard Flexshaft Handpiece.
Double bladed case knife made by Victorinox. Tweezer and pick included. Versatile case that is an indispensable tool for any watchmaker or hobbyist. Swiss Made.
Nice, wooden handled cannon pinion remover with lever. Can be used on all watch movements.
Made of hardened steel with mirror polished tips. Notched for easier positioning. Anodized aluminum handles. Tips are 2.5mm wide by 0.15mm thick. These are probably the best hand levers on the market.
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.60-0.70mm
High quality Dazor 3-Bulb bench lamp. Adjustable arm makes positioning easy anywhere on the bench. Clamps or bolts to your bench with ease.
Use Moebius Fixodrop as a surface treatment on pallets and escape wheels. Prevents oil from spreading to unwanted areas. This bottle has an integrated screen/filter for easy use. No need for an epilame bottle. 10ml
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
Plastic Movement Holders, Set of 12
7-1/2 to 22-1/2 Lignes
Self-locking jaws are ideal for soldering operations, or for holding parts. Blunt and serrated jaws.
Metal: Stainless Steel
Length: 6-1/2″
Graduated in millimeters across the top and 1/32″ increments across the lower half. All graduations are deeply etched.
Length 6″ (150 mm), width 1/2″ (12.7 mm)
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Chain nose.
Good quality carbon steel work pliers have smooth jaws. Polished heads to prevent marking on soft metals and cushion grip handles. Overall length is 4-1/2″. Side cutter.
One jaw is half-round and the other is round. Overall length is 5-1/2″.
Metal: Titanium
Length: 4-1/2″
Point: Sharp
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
Screw extractor. Reversible driving pin for Bergeon tool 30209. Size – 0.40-0.50mm
Super soft and scratch free cloths perfect for cleaning watch crystals or eyeglasses. 100% microfiber Lint Free 9″ x 9″ Machine washable
Assortment of 4 punches for riveting oscillating weight axles. For calibers 1570, 2135, 2235 and 3035/3135.
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
Set of four pin vices in a convenient storage case. Pin vices are made of nickel plated brass. Openings range from 0.1mm – 5.0mm.
- Overall length: 120mm (4.72″)
- Jaws: Round Nose, Very Fine
- Jaw length: 20mm (0.79″)
- Tip width: 0.7mm
Excellent performing pliers with extremely precise jaw alignment. Joint movement is highly stable and smooth which means extra precision even at the extreme tip of the jaws. Double-leaf springs with high-impact cushion grips. Overall length: 120mm (4.72″) Jaws: Flat Nose, Smooth Jaw Length: 20mm (0.79″) Tip Width: 3.2mm (0.13″)
Very dry, low-residue compound imparts a brilliant finish on gold, platinum and other hard metals. 4 oz.
This 14pc Tap and Die set has screwplate with taps for threading wire or re-threading stripped threads on screws. Sizes 0.7 – 2.0mm.
Simple but practical for holding bridge with balance attached while putting it in beat, straightening kinks in hairspring, undercutting screws, adding or removing timing washers, etc.
Replacement blade for the Gucci screw removing tool (SKU# 750.0204). Sold by the piece.
This popular model is called “Japanese” because it originated in Japan and features a special shaped fork tip. Many people prefer this shape for getting under straps and bands. Anodized aluminum body with hardened tool steel double-ended tip. Length: 5-1/4″ (135mm).
Double End Replacement Tip for Japanese Spring Bar Tool
The EURO TOOL bracelet holder is made from the perfect medium because wood will not scratch precious metals.
Now available in a high-impact, plastic gray color with more slots, including one which is extra wide for larger bracelets. Allows the repairer to tap out pins or take out and replace screws easily. Take the struggle out of band sizing. 2″ x 2-1/2″ x 1″.
This fine 6″ steel ruler is useful for quick measurements or scribing lines and features a hole in one end for hanging and includes a handy conversion chart on the back – inches to millimeters.
Quickly reshapes and resurfaces abrasive stones to like-new condition. A very hard and coarse silicon carbide stone with 4 different sized half-round grooves on one side measuring 1/16″, 1/8″, 3/16″, and 1/4″. Stone itself measures: 3-1/2″ x 1-3/8″ x 9/16″
Popular for use with rubberized abrasives. Sold by dozen.
With brass collar. Used with rubber points. Sold by dozen.
For use with wheels having 1/16″ arbor holes. Sold by dozen.
Wheel Diameter: 1″
Wheel Thickness: 1/4″
Hole Size: 1/16″
Ideal for use with rubberized abrasives. Sold by dozen.
Will fit whell sizes up to those listed. No. 43.158 is ideal for use with rubberized abrasives. Sold by dozen.
Fits wheels with 1/4″ hole size, up to 3″ in diameter and 1/2″ thick. Popular for use with rubberized abrasives.
Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.Set of seven, numbers 3 to 9 for baguette and pocket sizes, in a box. Designed especially for watchmakers. Nickel-plated to prevent rust. Reversible, double-ended blades and threaded ferrules for easy replacement. Color identified heads for quick selection.