Watch Tools
Browse Subcategories
3 oil holding cups and 3 dip oiler holders. Heavy-duty steel construction with rubber non-slip base.
Bracelet links remover plier. Comfortable rubber handle for easy grip. Length: 135 mm.
Horotec Metal Case Opener w/4 Nylon Dies. Swiss Made.
Generic Micro Stella regulator for all Omega Co-Axial 3303/3313
Plastic coating on tips provides chemical resistance. Use with steam cleaners and ultrasonic cleaners for non scratch retrieving. Cross lock version,mad of Nickel plated steel.
Metal: Stainless Steel
Length 6-1/2″
Point: Serrated tip
With fiber grips for heat resistance. Overall length 6-1/2 inches
Has two steel chucks with spare chuck held in end of hollow brass handle. Will not roll off your bench. Capacity 0 to .079″ (0 to 2.0 mm).
Includes Pin Vices: 0 to .040″, .025″ to .062″, .050″ to .125″, and .115″ to .188″.
Knurled ring slides forward to close steel jaws, making It easy to operate with one hand. Handle is hollow. Capacity 0 to .051″ (0 to 1.3mm). Overall length is 4-1/8″.
- 20X Magnification
- 21mm Lens diameter
- LED light
- On/Off switch
- Batteries included
Transverse end cutter with rounded cutting edge. Overall length 3-3/4 inches (95 mm). Carbon Steel.
Metal: Nickel Plated Carbon
Shorter version of pattern No. 3. Overall length 4-1/2 inches (114 mm).
Metal: Stainless Steel
Point: Sharp
Closing pressure is easily adjusted with these slidelock tweezers. Sharp, smooth points.
This Bergeon 5430 set of two hairspring collet tools is useful for rotating the collet on the balance staff, as well as a variety of other tasks.
The battery is part # 7733 and allows the quick charge of the cordless Iso-Tip soldering irons. For current production of Quick Charge models #7700, #7740 and #7750.
The 7700 is the basic unit and the biggest seller for a good reason. The 7700 is the crank up window of our soldering irons. The people that use them will use words like, dependable, bullet proof or easy battery change.
Precision screwdrivers with hex shaped heads, heat treated blades range from size .80 to 2 mm. Set of 6 in plastic pouch.
Snap those stubborn pins out in a hurry with this clever device.
For opening oyster-shaped cases made by Rolex. Includes the wrench and six dies in the appropriate sizes: 18.5 20.2 22.5 26.5 28.3 and 29.5mm.
Remover for screw type case backs. This model is popular with many watchmakers offering a large surface for grasping and adjustable claws.
This sturdy, durable padded work mat has a non-slip backing for a clear, level and comfortable work surface.
Replacement Tip for Horotec Case Opener MSA07.115 – 2mm
For bright high polish of soft metals such as brass, bronze and copper.
The original perfect non-scratch holder for steam and ultrasonic cleaning. Steamostats feature stainless steel box-joint construction PVC covered non-scratching tips.
A necessary bench accessory, bench pins are made of fine hardwoods to fit slots in work benches.
- Size: 7″ x 1-3/4″
Scientifically made single watch winder looks great for the shop or even for home use. The outer box is made of highly polished wood with a dark lacquered finish.
Scientifically made double watch winder looks great for the shop or even for home use. The outer box is made of highly polished wood with a dark lacquered finish.
Five piece nut driver sets are invaluable for clock makers, camera repair and electronics.
Made of hardwood and polished to a high gloss finish this 4 plier holder makes a great bench aid. Holes are beveled for easy in-out handling. Every bench can use a holder like this.
Envelope measures 5 3/4″ x 3 1/8″ and is packed 1,000 to a box.
You save (%)
Made in Germany, this plier is the best quality pin remover on the market. The round nose fits snugly into the recessed pin to snap it out cleanly. Length 5″ (125mm).
Designed to make opening watch cases easier. Just position the point between the case back and the case and slowly push.
The hardwood stand offers just the right degree of angle to make seeing and choosing the correct screwdriver as easy as possible.
Just squeeze and you’ll get the right amount of lightweight oil with rust inhibitors. Plastic spout extension available which enables you to get to those hard-to-reach places.
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
Sharp hooked points for wire wrapping, forming, bending and coiling. The angled points can also be useful for hard-to-get-at spots.
Similar to pattern No. 2, except points are .055 inches (1.4 mm) wide and rounded at the tips.
Bergeon 5011-B Replacement Key for Crown & Stem Removal
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
ETA 2892A2 Series Plastic Movement Holder. Also fits Omega 1138-1141
Metal: Nickel Plated Carbon Length: 3-1/2″ Point: Sharp
The 2.2L capacity 5100CJ features an external heating element for optimized steam, operating at 3.5 bar / 50 P.S.I. pressure for efficient cleaning. Adjust the steam nozzle as needed, activated by a heavy-duty foot pedal switch. Smart for your wallet and the planet.
Completely portable, attaches instantly to any smooth, non-porous surface. Large 3″ (76 mm), V-grooved, iron jaws open to 3″ (76 mm) with precision screw action. Universal ball joint rotates vise to any desired working angle. Includes a set of protective rubber jaws.
Bergeon 6571-BUR-3 watchmaker’s tweezer with replaceable boxwood tips. Antimagnetic stainless steel. Length 130mm (5″). Swiss Made.
Oil cup in green anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm
The Diablo vacuum leak detector functions by drawing a vacuum over the watch.
Red dip oiler with a large point. 2 spare needles are stored inside the handle. Swiss Made
Jewelry Shield’s specially patented formula lasts much longer than any other product or remedy available. One application lasts three months. 1/2 oz. bottle.
Beadsmith Digital Caliper 4″/100mm Carbon Fiber. Measurement range 0-4″ / 0-100mm
Green dip oiler with a medium point. 2 spare needles are stored inside the handle. Swiss Made
AF Pin punch set with chrome-plated brass handles, total length 55 mm. The fastening screw allows easy replacement of the hardened steel blade. The set includes diameters 0.70–0.80 and 1.00 mm, supplied in a plastic box.
One pair of Swiss Made hand setting tools. Two hole diameters per tool: 1.00 / 0.50 0.80 / pointed flat Body is made of blue anodized aluminum.
Oil cup in yellow anodized aluminum. Interior cup is made of white ceramic. Outer dimensions: 13.90 x 25.0mm. Inner cup dimensions: 3.0 x 6.0mm