Watch Case Tools

20mm, 30mm, 33mm & 42mm 5 prong case back openers for Omega Seamaster watches. Horotec Swiss Made.

Stainless steel blades with solid green wooden handle. Set of 4, to open numerous snap back watch cases with ease. Comes in a plastic housing to keep tools organize. Handy for all watchmakers alike. Size: 155mm x 145mm x 37mm.

Replacement Bits For Bergeon 2819/4 and 2819/8, Jaxa Swiss-Made Hand Wrench. 4 different sets, 3 pieces each. See listings.

Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm

Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm

Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.

Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.

Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.

Bergeon watch case opener. Swiss made. Lever width 5mm, lever length 110mm.

Large opening case opener. Open larger cases without detaching the bracelet using this tool with 55mm span and small head.

Replacement Pins for BG5700Z, For Casebacks with Holes, 1 Each

Forked Tip Only, 1.20mm, Swiss for Metal Spring Bar Tools

Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.

Bergeon Case Opening Wrench to Fit Rolex Watches, Includes handle and six dies, Dies sized from 18.5 – 29.5mm

Bergeon 55mm case cushion

Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.

Case opener specially made for Baume &amp Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec

Screw-On, Forked Tip for Spring Bar Tool

Screw-On, Pointed Tip for Spring Bar Tool

Pointed Tip Only, 0.8mm, Swiss for Metal Spring Bar Tools

Horizontal-type vise with center support allows for positioning blades on two sides at once.  The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm.  Swiss.

For closing/opening watches with screw on backs.

Provides maximum torque with little effort. 4 pairs of interchangeable pins (round, rectangle, knurled, curved). Large ergonomic top wheel for screwing and unscrewing with little effort.

Seven pusher punch bits: 2.95 mm, 2.65 mm, 2.45 mm, 2.15 mm, 1.95 mm, 1.75 mm, and 1.55 mm. Will remove friction fit buttons & fit friction fit buttons back into the piece. Swiss made.

Tool for assembling and disassembling screw-on watch pushers and watch tubes, and watch oscillating weight bolts. Assortment of 14 interchangeable keys in metal storage base.

This Horotec tool can be used with all the different dies that are available to fit Baume Mercier, Rolex, Omega, Breitling and many other screw back style watch brands. Swiss Made.

Used as a cover over watch faces and bracelets for protection during handling or transportation. Clings to glass, plastic and metal without glue or gum. Leaves no residue!

All Aluminum
Tapered on one side and straight on the other
Fits most BB style presses
6 pieces per set
Sizes include:
45×47
50×53
54×55
55×57
58×60
62×64

Made to fit the Rolex Sky Dweller Model. Will work work both Horotec and Bergeon Openers.

Die to fit Breitling case backs. 15 sided. Swiss Made.

Non-marring bezel remover

Outside diameter 2.6″ inches (66mm)
Inside diameter 1.65″ inches (42mm)
For bezel diameters 38-45mm

Comes with standard brush and 12 mm diameter round concave tip. Great for lens, watch crystals, and dials.

The EURO TOOL case press offers the best inexpensive case closer available. This is one of our most popular items and the closer we most recommend. Every bench should have one.

This Nylon Die Set is a replacement set of fourteen dies for CRY-905.00

Nylon dies to fit square or rectangular watches to use with case closer CRY-905.00. Five sizes to a set dies range from 15mm to 24mm. Offers you greater flexibility to close any snapback case without damage.

Set of six large aluminum dies to accommodate larger watches. Use with screw type case closer/crystal press. Set includes the following size dies: • 45-47mm • 50-53mm • 54-55mm • 56-57mm • 58-60mm • 62-64mm