Watch Case Tools
Browse Subcategories
This steel tool is used to install the Rolex® screw on pushers into a Rolex® watch case. McCaw Co. is independent of and not affiliated with or sponsored by Rolex®. Warranty does not apply to non-genuine parts supplied by McCaw Co.
AF Pin punch set with chrome-plated brass handles, total length 55 mm. The fastening screw allows easy replacement of the hardened steel blade. The set includes diameters 0.70–0.80 and 1.00 mm, supplied in a plastic box.
Artifex Abrasive Wheel Medium hardness & grain, SC150MP, foamed polyurethane. 100mm x 10mm x 6mm Hole. Made in Germany. Perfect for polishing cases, specifically high end brands such as Rolex.
Beregon 30409-A watch crown winder tool. Use this handy tool on manual wind watches with crown sizes 3.0-4.5mm. Easy to use, just press the spring loaded top to expose the jaws. Made of nickel plated brass. Tool measures 3.5″ x 0.4″.
Plastic movement holder for positioning hands and checking the chronograph function.
Menzerna 491FF, Polishing paste for stainless steel, fine polish, white, 250 gram bar
Horotec Key For Screw-on tubes Ø 3.00 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 2.95 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 2.75 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 2.65 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
This combination case closer/crystal press beats anything in its price range and beyond. Don’t destroy watch cases or case backs by using the wrong tool. Our Combo Closer will give you years of satisfaction and service. Another Eurotool best buy.
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
This Jaxa-Mini case wrench is specifically designed to open case backs of large watches. The ergonomic shape provide a firm and comfortable grip. Opens diameters from 18 mm to 62 mm Delivered with 1 set of 2 pins. SWISS MADE
This Bergeon glass pen is ideal for cleaning watch crystals, dials, hands, and even precious stones. Can also be used to clean your loupe lens.
Removes and inserts immediately, crystals without dis-assembling the watch. Will not damage the crystal. For any unbreakable crystal without tension ring.
High quality, stainless steel dies are machined perfectly to fit the Breitling® cases.
Elongated Square Jaws for Horotec Press. Fits Mini or Maxi Press.
Elongated Round Jaws for Horotec Press. Fits Mini or Maxi Press.
Set of 8
Flat die sizes: 35 mm, 40 mm, and 45 mm
Double sided concave die sizes: 40/42.5 mm, 45/47.5 mm, 54/55 mm, 50/52.5 mm, and 56/57 mm
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
Double bladed case knife made by Victorinox. Tweezer and pick included. Versatile case that is an indispensable tool for any watchmaker or hobbyist. Swiss Made.
Casing cushion with a chromed metallic ring. 75mm in diameter.
Bestfit Springbar Removing Tool. Includes fine point and forked tip.
Strengthened Polyimide stick, can be used in the place of traditional pegwood. One end is pointed, the other end is flat.
This Bergeon movement holder is incredibly versatile because it is reversible. It allows you to hold large watch movements from 20 mm (8 ¾ ligne) to 43 mm (19 ligne) in size. It is considered to be a classic by watchmakers. It is made of a synthetic non-marring material protect the watch movement.