Watch Case Tools
Browse Subcategories
Comes with standard brush and 12 mm diameter round concave tip. Great for lens, watch crystals, and dials.
Non-marring bezel remover
Outside diameter 2.6″ inches (66mm)
Inside diameter 1.65″ inches (42mm)
For bezel diameters 38-45mm
Round head, double ended the chucks are hardened steel and the handle is Chromium plated. Overall length 90 mm, opens on one end from 0.5 mm to 1.00 mm on the other end 1.0 mm to 1.5 mm
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Set includes seven dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Does not include handle or key.
Horizontal-type vise with center support allows for positioning blades on two sides at once. The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm. Swiss.
Pointed Tip Only, 0.8mm, Swiss for Metal Spring Bar Tools
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Bergeon Double Lever Case Opener. Has two edges for opening snap back cases, one on the end and one on the side. The edges are smaller than on other tools for more delicate cases.
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
Horotec MSA10.302 tool for fitting and removing spring bars. Double sided tool with a 4mm forked end on side and a reversible .80mm pin and 1.20mm forked end on the other side. 5 1/4″ in length. Sturdy enough to get the even the most stubborn spring bars loose. Made of stainless teel. Made in Switzerland. […]
This combination case closer/crystal press beats anything in its price range and beyond. Don’t destroy watch cases or case backs by using the wrong tool. Our Combo Closer will give you years of satisfaction and service. Another Eurotool best buy.
Die to open the Citizen Aqualand dive watch. This die has 5 notches that fit perfectly in the caseback. Made in France.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
This Jaxa-Mini case wrench is specifically designed to open case backs of large watches. The ergonomic shape provide a firm and comfortable grip. Opens diameters from 18 mm to 62 mm Delivered with 1 set of 2 pins. SWISS MADE
Elongated Square Jaws for Horotec Press. Fits Mini or Maxi Press.
Elongated Round Jaws for Horotec Press. Fits Mini or Maxi Press.
Set of 8
Flat die sizes: 35 mm, 40 mm, and 45 mm
Double sided concave die sizes: 40/42.5 mm, 45/47.5 mm, 54/55 mm, 50/52.5 mm, and 56/57 mm
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
Casing cushion with a chromed metallic ring. 75mm in diameter.
Bestfit Springbar Removing Tool. Includes fine point and forked tip.
Bergeon 5674-D Replacement nylon jaw for Bergeon 5674 Case Vise. Sold per jaw.
Taps for 5.3mm and 6.0mm Rolex case tubes. Use these to clean up or re-align the threads of Rolex case tubes. ***McCaw Co is independent of and not affiliated with or sponsored by Rolex® Watch U.S.A. Inc. Rolex® warranty does not apply to non-genuine parts supplied by McCaw Co***
Nylon dies for BB Style Press. 16 double sided dies with flat and tapered walls. Can be used for closing cases, press fitting crystals or installing bezels.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
Newall Retro-Fit is a two-part room temperature silicone molding putty that will fill watch cases with 0% shrinkage. Safe, non-hazardous and non-toxic. No unpleasant fumes or odors. Easy to use – merely mix equal parts of the green and white putty by hand. Working Time – 1-2 minutes Cure Time – 15 minutes Instructions included.
Assortment of seven red suction dies for screw back watches. These dies are made of a soft, synthetic material that forms to fit almost any case back you come across. Sizes included are: 16, 20, 23, 26, 30, 34, and 40mm. Works perfectly with the Horotec Minipress and Maxipress.
This is the replacement blade for the Right Handed Bergeon Case Opener Tool 6987.
5 Delrin® Screw-on Reversible Dies for Fitting Large Case Bezels