Watch Case Tools
Browse Subcategories
Replacement Tip for Horotec Case Opener MSA07.115 – 4mm
Configured to make opening certain cases easier this 3 opener is popular among many watchmakers. Simply place the blade under the case back and twist.
Economy case knife is 4″ long with hard plastic handle and tempered blade. Fixed blade does not fold into handle.
Artifex Abrasive Wheel Fine, SC80WP. Grit 80, foamed polyurethane. 100mm x 10mm x 6mm Hole. Made in Germany.
The EURO TOOL case press offers the best inexpensive case closer available. This is one of our most popular items and the closer we most recommend. Every bench should have one.
Provides maximum torque with little effort. 4 pairs of interchangeable pins (round, rectangle, knurled, curved). Large ergonomic top wheel for screwing and unscrewing with little effort.
Enables the range of Bergeon 5537 Rolex dies and Breitling dies to be used with Horotec MSA07.320, Horotec MSA07.363 & Bergeon 5700-Z waterproof case openers.
Bergeon watch case opener. Swiss made. Lever width 5mm, lever length 110mm.
This steel tool is used to install the Rolex® screw on pushers into a Rolex® watch case. McCaw Co. is independent of and not affiliated with or sponsored by Rolex®. Warranty does not apply to non-genuine parts supplied by McCaw Co.
Horotec Key For Screw-on tubes Ø 3.00 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Reversible tip featuring a .80mm straight tip and a 1.20mm forked end.
Use these convenient plastic stoppers to help save your watch battery while not wearing your watch. The small plastic pieces will ensure your crown stays pulled out. Available in six sizes: .50mm, .60mm, .70mm, .80mm, 1.00mm, 1.20mm, 10 pieces each.
Bestfit Springbar Removing Tool. Includes fine point and forked tip.
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
This is the replacement blade for the Right Handed Bergeon Case Opener Tool 6987.
5 Delrin® Screw-on Reversible Dies for Fitting Large Case Bezels
3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
You save (%)
For opening and closing screw backs and bezels. Has two cup sizes for 0 to 18s watches.
We have had many calls for larger snap-on nylon dies to fit our CRY-905.00. This set is designed for larger oversized watches that are very popular, and most have snap-on case backs.
Horotec Metal Case Opener w/4 Nylon Dies. Swiss Made.
For opening oyster-shaped cases made by Rolex. Includes the wrench and six dies in the appropriate sizes: 18.5 20.2 22.5 26.5 28.3 and 29.5mm.
Remover for screw type case backs. This model is popular with many watchmakers offering a large surface for grasping and adjustable claws.
Replacement Tip for Horotec Case Opener MSA07.115 – 2mm
Designed to make opening watch cases easier. Just position the point between the case back and the case and slowly push.
Horotec Deluxe Press for Case Backs, Crystals and Bezels Using Screw-on Dies. A very stable press with a head and aluminum case mounted on 2 robust steel columns
This tool offers the best of both worlds – price and quality. Made of metal with multiple dies this crystal press/case closer is the perfect tool for snap-back cases.
20mm, 30mm, 33mm & 42mm 5 prong case back openers for Omega Seamaster watches. Horotec Swiss Made.
You save (%)
Used as a cover over watch faces and bracelets for protection during handling or transportation. Clings to glass, plastic and metal without glue or gum. Leaves no residue!
You save (%)
Set includes eight dies in standard Rolex sizes: 18.5 mm, 20.2 mm, 22.5 mm, 26.5 mm, 28.3 mm, 29.5 mm, 34.0mm, 36.5mm. Also included is the versatile Horotec Universal key.
Horizontal-type vise with center support allows for positioning blades on two sides at once. The blades are forced in with a few turns of the knob. Two pairs of blades included, 2mm and 4mm. Swiss.
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
Bergeon 5011-B Replacement Key for Crown & Stem Removal
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
AF Pin punch set with chrome-plated brass handles, total length 55 mm. The fastening screw allows easy replacement of the hardened steel blade. The set includes diameters 0.70–0.80 and 1.00 mm, supplied in a plastic box.
Plastic movement holder for positioning hands and checking the chronograph function.
Horotec Key For Screw-on tubes Ø 2.95 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Key For Screw-on tubes Ø 2.65 mm. Replacement key for MSA03.621, MSA03.622, & MSA 03.623
Horotec Pusher Stake Replacement Tips for Pusher Stake Tool MSA03.657
You save (%)
Replacement blades for Horotec MSA07.117 Bezel Remover. Mirror polished, hardened blades are interchangeable on all sides of the bezel remover.
Tool for screwing and unscrewing threaded chronograph pusher tubes. Use this tool to safely remove pusher tubes.
This Jaxa-Mini case wrench is specifically designed to open case backs of large watches. The ergonomic shape provide a firm and comfortable grip. Opens diameters from 18 mm to 62 mm Delivered with 1 set of 2 pins. SWISS MADE
Elongated Square Jaws for Horotec Press. Fits Mini or Maxi Press.
Elongated Round Jaws for Horotec Press. Fits Mini or Maxi Press.