Shop

Stainless steel clasp 6.0mm width at band connection, 40.0mm length, 12.0mm width.

Fill the cup in the center with wax or clay to form the base for the sprue.

Foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot.

Calypso Waterproofing Machine – Cylinder Gasket – 70mm. Round O ring gasket for between cover and cylinder. 70mm in diameter.

Waterproof tester up to 10 bars used with water The pressure is generated by a manual pump Leaks revealed by bubble stream Manual release valve for safety Cylinder is 80mm inside diameter, suitable for 2 watches Dimensions: 170 x 200 x 270mm Made in Italy Instructions included

Replacement carbon rod.

Holds rings, leaving both hands free. Mounted in fixed position on asbestos-free base. Length of rod is 6″.

For stirring gold in crucible while melting.

For stirring gold in crucible while melting.

Replacement carbons.

For use with cartridge rolls.

For use with cartridge rolls.

For use with cartridge rolls.

For use with cartridge rolls.

Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.

Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.

Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.

Rolled aluminum oxide abrasive material used for polishing and deburring. Sold by pack of 25. Measures 1/2″ diameter, 1/8″ hole. Available in Coarse, medium and fine grit.

Case Back Screw Assortment, 120 Pieces, assorted for most popular watches. Swiss Made.

10 sizes, 10pcs each 2.0 x 6.8 2.5 x 4.2 2.0 x 4.2 2.5 x 3.65 2.5 x 3.6 1.7 x 3.3 2.2 x 3.2 2.2 x 2.9 2.2 x 2.85 1.5 x2.36

This combination case closer/crystal press beats anything in its price range and beyond. Don’t destroy watch cases or case backs by using the wrong tool. Our Combo Closer will give you years of satisfaction and service. Another Eurotool best buy.

This tool offers the best of both worlds – price and quality. Made of metal with multiple dies this crystal press/case closer is the perfect tool for snap-back cases.

The EURO TOOL case press offers the best inexpensive case closer available. This is one of our most popular items and the closer we most recommend. Every bench should have one.

Parallel closing jaws with circular, rubber padded, hinged discs provide dependable case closing. Overall length is 7 1/2″.

A must for every watchmaker this movement holder clamps onto the edge of your bench. The holder is made of metal and will hold any size movement.

Case Opener for Gucci Style Cases

3 different diameter (25 – 30 – 33mm) Swiss made by Horotec

Choose from 5.3(yellow) & 6.0(blue) case tube remover for Rolex.

A safe non-toxic silicone based spray to release wax patterns from rubber molds. Non-flammable, non-CFC and environmentally safe.

Made of durable stainless steel. Use with Button Sprue base or Tree Sprue base for leak-proof seal.

Used to make small dent as starting point for drill. Punch is tapped with small hammer. Made of steel with knurled handle for firm gripping surface. Slim design, can also be used as a scriber.

Non-asbestos. Flat on one side, with grooves on the other, for holding shanks, chains, etc. Withstands temperatures up to 2000F (1093C). Measures 71/2″ x 71/4″ x 7/8″.

Mounted on base with swivel to provide the exact position or angle desired. 6″ ceramic rod is much cleaner than carbon and holds heat better. Clamp releases rod for replacement.

Replacement ceramic rod.

Ceramic 6×6 block with feet. Non-asbestos. Withstands temperatures up to 2000 F (1093 C). Rubber feet keep board raised above bench.

Thirty vibrant colors are available which can be mixed. Adheres to metals, wood, plastics, ceramics, etc. and can be stoned and polished.

Economical Chain Roll, Black Velvet & Vinyl, 16 Snaps. Dimensions 22″ x 11″. Velcro closure.

EURO TOOL’s premium-quality box-joint pliers are the most popular size used by professionals for fine work. Each lightweight German-made plier has been superbly polished.

Engineered particularly for fine work and smaller hands this teal slimline series is designed specifically for beading and wire wrapping.

Sturdy full size pliers have box joint for smooth operation. Have leaf spring and cushion grips for comfort. Overall length is 5 1/4″. Chain nose 1 1/4″

Extra Duty box-joint pliers feature double-leaf springs and red vinyl grips. Made in Germany of the finest European steel.

Jaws taper to 1/32″ at tips and can be used to make bends and for gripping and manipulating wires. Overall length 6″, length of jaws 1-1/2″. Serrated jaws.

Curved tips taper to 1/16″ for setting small stones. Box joint for alignment with built-in spring. Overall length is 4-1/2″.

Jaws taper to 1/32″ at tips and can be used to make bends and for gripping and manipulating wires. Overall length 6″, length of jaws 1-1/2″. Smooth jaws.

Jaws taper to 1/32″ at tips and jaw edges are beveled to prevent marring of soft wire. Used to make bends and for gripping and manipulating wires. Overall length 5 1/4″. Smooth jaws.

Use with rouge to produce the highest finish on gold. Stitched with leather patch. on center for firm grip on tapered spindle.

Diameter: 2-1/2″

Ply: 12

Use with rouge to produce the highest finish on gold. Stitched with leather patch. on center for firm grip on tapered spindle.

Diameter: 3″

Ply: 12

Use with rouge to produce the highest finish on gold. Stitched with leather patch. on center for firm grip on tapered spindle.

Diameter: 4″

Ply: 18