Shop
Browse Subcategories
Grey anodized shot blasted aluminum base – 4 synthetic ruby cups – 4 oilers with aluminum handle in different colors The cups can be replaced individually
You save (%)
Bergeon oscillating weight remover for ETA Calibers 2891-2895, 7750, and 2000-1. Tips store in handle.
You save (%)
The H.18 is for use with only 2.35mm (3/32″) shank burs.
You save (%)
Precision pliers with a locking thumb screw for fine adjustment of cannon pinions.
You save (%)
Set of 15 Reamers and Spindle from Bergeon.
You save (%)
Assortment of 9 watchmakers screwdrivers with ball bearing heads. This set is in a nice wooden case and includes nine spare blades and two spare set screws. Sizes included: .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50, 3.00mm.
You save (%)
Identifies, detects and separates diamond from CZ, moissanite (including the new most difficult F1 moissanite) and white sapphire
You save (%)
Eco Drive capacitor 295-56(included)
Size 14 1/2
Hand Size 70/120/20
Stem 065-526
Chrono, 3 eyes
Can replace Citizen C650
You save (%)
Genuine Omega Speedmaster Stainless Steel Watch Clasp 117ST1469811
You save (%)
Genuine Omega 20mm Black Textured Calf Watch Band 97361079. Takes a 16mm buckle(not included)
You save (%)
Genuine Omega Stainless Steel Clasp 117ST1612932
You save (%)
Tool allowing to adjust the opening resistance of the folding clasp buckles. Includes 6 nylon dies: 3 convex and 3 concave. Swiss Made.
You save (%)
Case opener specially made for Baume & Mercier. Contents 3 dies for 3 different diameter (25 – 30 – 33mm) Swiss made by Horotec
You save (%)
The M-24 precisely determines gold karat values equal to or greater than 9K 10K 12K 14K 16K 18K 20K 22K and 24K.
You save (%)
Bergeon 7100 Movement Holder – specifically for ETA 7750 series. Will also work with Sellita SW500. Made of anodized aluminum. Tempered steel support bolt with polished end and locking system, compatible with stem. Base Ø31mm. Swiss Made.
You save (%)
Size 11 1/2L 4.4mm thick Hand Size 90/150/25
You save (%)
Set of 10 entirely stainless steel ergonomic colour coded screwdrivers in a wooden box. Sizes:0.50mm, 0.60mm, 0.80mm, 1.00mm,1.20mm,1.40mm,1.60mm, 2.00mm, 2.50mm and 3.00mm.
You save (%)
The H.8D has the same specs as the H.8, except includes a duplex spring for added flexibility.
You save (%)
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Propane
Fits Cylinder: Fits disposable propane
You save (%)
Designed for use with the “Little Torch”, but can be used with any torch. Easy to read. UL listed.
Gas: Oxygen
Fits Cylinder: Fits disposable oxygen
You save (%)
Bergeon Ergonmic Oilers. Set of Four Oilers: Red/Blue/Green/Yellow, High Precision, Stainless Steel Needles, Anti-Static Handles
You save (%)
Three piece Bergeon pin vice assortment. Sizes included: 0.0-0.5mm 0.5-1.0mm/1.0-1.5mm 1.0-1.5/1.50-2.0mm
You save (%)
Complete with 4 collets in sizes .80mm, 1.0mm, 1.20mm, 1.50mm.
You save (%)
Firs models: SBBN011 SBBN013 Fits case# 7C46-0AA0
You save (%)
Genuine Omega Deville 97634049 Green Croco Leather Watch Strap. 16mm, buckle side 14mm. Buckle not included. Fits Omega case: 196.0316
You save (%)
Genuine Omega Titanium End Piece 026TI934
You save (%)
Genuine Black Omega Alligator 12mm Watch Strap 97361022
You save (%)
Genuine Omega Stainless Steel Watch Clasp 117ST1508835
You save (%)
Reduces and enlarges rings without effort. This well-made sizer has six splines on the enlarging mandrel and takes rings up to size 15. The reducing plate has sixteen openings and is smoothly polished to prevent marring. Can be bolted to bench or used as a portable.
You save (%)
Cost effective way to accurately measure gemstones; delivers millimeter read out with instant carat conversion.
You save (%)
Economical workhorse, ideal for precision work. Ball-bearing motor runs smoothly, requires no lubrication. Includes motor, handpiece, and foot pedal. Full 1-year warranty.
You save (%)
The H.15 Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work.
You save (%)
A premium collection of 9 Swiss Screwdrivers on a rotating stand including 9 spare blades. Hardened stainless steel blades. Sizes: 0.50, 0.60, 0.80, 1.00, 1.20, 1.40, 1.60, 2.00, 2.50 mm.
You save (%)
H.15D has the same specs as the H.15, except includes a duplex spring for added flexibility.
You save (%)
The innovative design enables the user to raise, lower, or tilt, to direct the light source quickly and efficiently. Perfect for precision work!
You save (%)
Assortment of 4 anodized aluminum oil cups with ceramic cups. The oil cups can be used individually or on the base plate.
You save (%)
Swiss made tool for removing broken screws from watch movements. Includes two double sided bits (.80mm and 1.00mm).
You save (%)
Tool to Round Tips of Balance Pivots. Rod Shaped. Use with a lubricant is recommended.
You save (%)
Supplied with 1/16″ center hole and can be used with mandrels with 3/32″ or 1/8″ shank in power tools with safe maximum speed of 25,000 RPM. Sold by box of 100.
You save (%)
Used for removing watch crystals from one-piece watch cases. Available with 3 size watch case fittings:∅ 1.60 – 2.00 – 2.50 mm Includes key for removing the half-stem with the crown Size 4 X 0.79 X 0.79″ Inches (103 X 20 X 20mm) Swiss Made
You save (%)
Drop injection oiler. For train wheel pivots, cup bearings, everywhere the oiler has to be positioned before depositing oil.
You save (%)
Base for screwing and unscrewing bracelets. Includes 4 screwdriver blades 1.0, 1.4, 1.8, 3.0 mm. Blade height can be easily adjusted with the thumb screw. 70mm base.
You save (%)
Set of four dies for opening Omega Seamaster case backs. Sizes included are: 20mm, 30mm, 33mm, 42mm. Swiss Made.
You save (%)
Horotec MSA 13.153 Assortment of 7 Incabloc® Stakes and 6 Pushers with an axle of Ø4mm suitable for use with jewelling tools.
You save (%)
10 stainless steel pins with stainless steel pin holder. Sizes included: 0.40, 0.60, 0.70, 0.80, 0.90, 1.00, 1.20, 1.50, 1.80, 2.00 mm
You save (%)
24 full half-spheres on Wooden Base. All punches are polished and hardened to 50 Rockwell hardness at both ends, the sphere end and the hit end of the punch.
You save (%)